Product Overview
The SL-2 Dual SuperSlot Wireless Module streamlines your audio setup by integrating two wireless receivers onto any 8-Series mixer-recorder. It supports UniSlot and SuperSlot™ receivers from various manufacturers, providing up to four channels of wireless audio per slot. The SL-2 receives power from the mixer-recorder and reduces cable clutter by transmitting analog or digital audio through the expansion port. It also offers antenna distribution for improved RF performance. The rear panel features additional AES3 audio inputs and 4-pin Hirose DC Outputs for powering extra equipment.
Sound Devices SL-2-SDV Features:
- Compatible with the 833, 888, and the Scorpio.
- Supports up to 8 channels of audio.
- Accepts two UniSlot or SuperSlot wireless receivers from Sound Devices, Audio Ltd, Lectrosonics, Sennheiser, and Wisycom.
- Built-in antenna distribution with antenna powering for active antennas or boosters.
- Supports remote control of third party smart antennas.
- Two auxiliary MCX antenna ports for connecting other receivers or RF distribution.
- Two TA3 AES3 inputs for 4 channels of digital audio.
- Two DC Outputs via Hirose 4-pin connectors, each supplying up to 500 mA.
- Powers via an 8-Series mixer-recorder.
- Accepts either analog or digital audio from slot-in receivers.
- Ability to set and monitor multiple functions of a SuperSlot-compatible receiver from the 8-Series mixer-recorder.
- RF Scan with visual representation of the RF spectrum.
- Monitor transmitter battery, receiver audio, and RF levels.
- Rugged, lightweight, and compact design.
- Mounts to the top of any 8-Series mixer-recorder.
- Same width as the 833.
Sound Devices SL-2-SDV Specifications:
- Powering: All power supplied by host 8-series machine, SL-2 idle power draw 1.3 W (without receivers or antenna)
- Antenna Impedance: 50 ohms
- Antenna Powering: 12 V at 200 mA, menu selectable on/off, Serial remote control, Wisycom-compatible for ADFA and LFA powered antenna etc.
- Antenna Pre-select Filters: Menu selectable: Wideband/bypass (low pass filter, 1.7 GHz upper cut-off):
- 470-614 MHz
- 542-694 MHz
- 606-770 MHz
- 770-960 MHz
- 1240-1260 MHz
- Input RF Attenuators: 0 to -1 8 dB, in 6 dB steps, menu selectable
- RF Outputs: Auxiliary Antenna Outputs for additional receiver
- DC Outputs 1-2: 500 mA max (each), 6-18 VDC passed through from host 8-series machine, depending on power source. Hirose 4-pin connector: pin 4 = +, pin 1 = ground.
- AES Inputs: Two pairs for a total of four channels, AES-3 balanced, 110 ohms, TA-3 connectors
- Dimensions H x W x D: 4.5 cm x 21.3 cm x 13.1 cm (1.8 in x 8.4 in 5.1 in)
- Weight: 1.35 lbs (unpackaged), 0.61 kg (unpackaged)
