Galaxy Audio CRICKET
Polarity/Continuity Tester

CRICKET

Galaxy Audio's Cricket can test the polarity of wireless microphones, mixers, effects devices, amps, cables and speakers. Polarity, should it become reversed, can play havoc with a sound system. If two sources are emitting the same electrical or acoustic tone (frequency), and one of those sources is in a state of inverted polarity, those tones, when combined at a given point, will cancel each other. While cancellation does not always indicate a complete loss of all sound, it does result in diminished sound quality. Unlike phase, polarity, at all distances and times, is either in or out. It's absolute. Galaxy Audio's battery powered Cricket Polarity/Continuity Test Set makes it easy to determine whether every component in an audio system—from patch bay to console to speakers—is in or out of polarity. The Cricket tests balanced and unbalanced cables of up to 2,000 feet in length. It will drive a "snake" (even one with transformers), and indicate which of a microphone's XLR connector pins is hot.  A glance at the Cricket's red and green LED's can save hours of trouble shooting.  No wonder it's an indispensable tool for sound system owners, operators and installers.

Cricket Send Pulse Generator

• Pulse Waveform Polarity: positive-going balanced lineoutput pulse, switch selectable for hi or low level balanced signal withpositive pressure produced at the tip of 1/4" jack and pin #2 of XLR jack.
• Speaker Output Pulse: Accepts 2 ohm (or greater) loadwith positive pressure produced at the tip of a 1/4" speaker jack and positiveterminal of an internal speaker.
• Dimensions (W x H x L): 3.33" x 1.75" x 5.25"
• Weight (with battery): 11 oz
• Battery: 9 volt, alkaline only (not included)

Cricket Receive Pulse Detector

• Switches: Internal microphone for testing speakeroutput
• Polarity/Continuity Test: Female XLR pin 2,3,1continuity; 1/4" jacks: tip, ring continuity
• LED Indicators: Green: indicates positive-going pulsepolarity with power switch in "ON" position and battery status with Powerswitch in "BAT" position; Red: Indicates negative-going pulse polarity
• Detection Inputs: one 1/4" balanced, one XLR balanced
• Mic Sensitivity: -64 dB, +3 dB
• Function Select: Polarity only or continuity
• Weight (with battery): 10.5 oz
• Battery: 9 volt, alkaline only (not included)
• Test set Shipping Weight: 3 lbs

Our Part #  CRICKET