Audio-Technica PRO44

The PRO44 is a wide-range condenser microphone with a hemi-cardioid (half-space cardioid) polar pattern. It was designed for surface-mounted applications in high-quality sound reinforcement and other demanding sound pickup situations. Its low-profile design makes the PRO44 ideal for use in applications where minimum visibility is required. The PRO44 can be powered from any external 9V to 52V DC phantom power source. A 25' (7.6 m) cable with TA3F and XLRM-type connectors is provided for use between the microphone and electronics input. The microphone element is enclosed in a rugged housing with a black finish. The rubber non-slip bottom pad minimizes mechanical coupling of surface vibrations to the microphone.

Features:

• Low profile for minimum visibility
• Wide-range condenser element with low-mass diaphragmfor superior performance
• Self-contained electronics eliminate need for externalpower modules
• Rugged design and construction
• 25' (7.6 m) detachable cable (TA3F to XLRM-type)

Specifications:

• Element: Condenser
• Polar Pattern: Unidirectional
• Frequency Response: 70-16,000 Hz
• Open Circuit Sensitivity: -25dB (56.2 mV) re 1V at 1Pa
• Impedance: 100 ohms
• Maximum Input Sound Level: 114 dB SPL, 1kHz @ 1% THD
• Signal to Noise Ratio: 66 dB, 1kHz @ 1 Pa
• Dynamic Range (Typical): 86 dB, 1 kHz @ max SPL
• Phantom Power Requirements: 9-52V, 2 mA typical
• Weight: 2.4 oz (67 g)
• Power Module: Integral
• Output Connector: XLRM-type on cable

TMGR# PRO44