Audio Technologies Inc. MXS100

The MXS100 is a full featured field or studio, three channel, switchable microphone/line mixer with low noise balanced inputs, phantom power, pan pots, switched low cut filters, slate microphone, stereo tape in and output and a test tone oscillator driving stereo.

Nanoamps from ATI: a compact, convenient and rugged series of low cost mixers and utility amplifiers featuring professional XLR type connectors, high performance, low noise circuitry and quiet, UL and CE approved remote power modules. Use them free standing. Stack them or rack mount one, two or three across in only 1 3/4".

Features

• Three XLR low noise, microphone/line balanced inputs with phantom power and pan pots
• Balanced line level stereo outputs have independent headphone program monitoring and bright LED bargraph VU meters
• VCA master gain and headphone controls
• Quick change AC line operated supplies, replaceable and rechargeable battery power packs and DC set-up converters for belt packs are available
• Expand the MXS100 mixer with an XPS100 for four switchable microphone/line inputs with pan pots or combine with the XPS200 to add two stereo line level inputs
• Use multiple input expanders to precisely meet your requirements
• Expanders inlude all audio and DC interconnects

Specifications

• Output Level: +22dBm MAX, +4dBm nominal into 600 ohm balanced or unbalanced lines; Output is selectable +4dBm (line) or -50dBm (mic)
• Frequency Response: +0/-.3, 20Hz-20kHz
• Distortion: .5% maximum 20Hz-20kHz at +20dBm
• Noise: MIC input: EIN = -126dBm; Line: EIN = -86dBm; 20Hz-20kHz measurement bandwidth
• Gain: Mic inputs: +82dB max; Line inputs: +42dB max
• Headphone Output: 100mW to 600/150 ohm phones, TRS jack
• Limiter: 5:1 slope, attack time 25ms, recovery time 200ms for 10dB change
• Phantom Power: +24VDC nominal @ 4ma through paralleled 6.8k ohm; PH48-1 48VDC phantom power available as an option
• Power: 22 to 30 VDC, 24VDC nom.; MX @ 160 mA
• Dimensions (H x W x D): 1.75" x 5.6" x 5.75"
• Weight: 1.25 lbs
• Mounting: Free standing or rack mountable: one, two or three units in 1 3/4"
• Connectors: Standard XLR female inputs and XLR male outputs
• Tape: Monitor input and tape output, 3.5mm stereo mini jacks