Radio Design Labs FP-DCC1

The FP-DCC1 is the ideal choice in many applications where audio or video modules need to be powered from a 12 Vdc source. Ground-referenced RDL modules may be operated from one of the FP-DCC1's two outputs. One is a high current output providing 400 mA @ 24 Vdc intended to power multiple modules (see RDL ST-PD5 Power Supply Distributor for multiple module installations) or RDL audio power amplifiers (such as ST-PA2 or ST-PA6). A second low noise output is heavily filtered and provides 50 mA @ 24 Vdc specifically to power microphone level high gain modules, such as microphone preamplifiers. Both outputs may be used simultaneously.

The FP-DCC1 outputs are regulated to provide 24 Vdc for input voltages normally encountered in 12 Vdc battery circuits. If voltage in excess of 15 Vdc (possible if a vehicle’s regulator should fail) is connected to the FP-DCC1 input, the module protects itself by shutting down its internal circuitry and illuminating the INPUT OVERVOLTAGE LED. The FP-DCC1 input and outputs are protected against excessive currents and reverse voltages. The FP-DCC1 is not intended to power floating (bipolar) modules.

Features:

• 24 Vdc Power from 12 Vdc Source
• Mobile Powering of 24 Vdc Modules
• 24 Vdc Ground-Referenced Power Output
• Separate High-Current and Low-Noise Outputs
• Terminal Block and DC Jack Outputs
• Ultra-Compact All Metal Construction
• Convenience of RDL® FLAT-PAKs™

Specifications:

• Outputs (3):
  One 24 Vdc regulated @ 400 mA (detachable terminal block)One 24 Vdc regulated @ 400 mA (dc power jack) (Note: The combined load forboth the above outputs is 400 mA)
  One 24 Vdc regulated @ 50 mA filtered (detachable terminal block)
• Fuses (2):
  One 2 A Automotive blade style miniature fuse (Input), One 1 A Automotive blade style miniature fuse (Output)
• Power Requirement:
  GROUND-REFERENCED, 11-14 Vdc @ 1 A, (detachable terminal block)
• Dimensions:
  Height: 1.25 in. 3.18 cm
  Width: 3.25 in. 8.26cm
  Length: 6.54 in. 16.61 cm