Because dynamic microphones have lower output levels than condenser microphones, long cable lengths often result in a noticeably noisy signal. Sanken’s innovative HAD-48 solves this dilemma by increasing the microphone level considerably without degrading the signal. Providing a choice of switchable 20dB or 40 dB of gain, this greatly improves the signal-to-noise ratio. Additionally, increased noise due to added gain in the microphone preamp can be reduced.

The HAD-48 features an XLR-M XLR-F tube only 105.3mm long and runs off 48V phantom power from the mixer input (no batteries needed!) and draws only 3mA.

Features:

• Provides needed gain for dynamic microphones
• Provides gain boost for long cable lengths
• Selectable Gain: +20dB or +40dB
• Powered by mixer phantom 48 volts
• No batteries required
• Small and portable, attractive packaging
• Does not allow phantom power to reach the microphone

Specifications:

• Gain: +29dB or +40dB switchable
• Nominal input level: 1.0mV(-60dBV)
• Nominal output level: 0.1V(-20dBV); Select +20dB position for high impedence output dynamic mic and +40dB position for low impedence output mic.
• Frequency res: 50Hz~20kHz
• Consumption current: less than 4.5mA
• Noise level: -121 dBA
• Max Input Level: 0.48V(-6.4dBV)(+20dB position)
• (THD 1%): 47.7mV(-26dBV)(+40dB position)
• Max Output level: 4.8V(13.6dBV)(THD1%)
• Input impedence: 10k Ohms (1kHz)
• Output impedence: 180 Ohms (1kHz)
• Expected receive side impedence: more than 10k Ohms
• Powering: 48V phantom fed from mixer or micpre side
• Input connector: XLR-3F
• Output connector: XLR-3M
• Dimensions: 115.3mm(L), 19mm(depth)
• Weight: 90g

Se