Product Overview
The Blackstar Amps FS-10 footcontroller gives you simple on-the-fly control of your ground-breaking ID:Series amplifier, allowing you to get the most from it in a performance situation.
Blackstar Amps FS-10 Features:
- On-the-fly Control: The FS-10 has been designed from the ground up to give you dynamic control of your ID:Series amp. Fully compatible and powered direct from the amp, it's the simplest way to unleash any ID:Series amp's full performance potential.
- Patch Mode: This mode allows you to switch between the three banks of four patches accessible on the front panel of the amp (patches 1-12) in addition to patches 13-128, plus access to the tuner function and the ability to change to the other modes.
- Effects Mode: This offers individual switching of the effects within a patch, operating more like traditional effects pedals. In this mode the fourth switch is used to control the tap time function.
- Navigation Mode: Enables access to the complete set of 128 patches stored on the amp. These can be stepped through one at a time, or in banks. Whilst in this mode you can also store patches.
- Chromatic Tuner: Access the amp's on-board chromatic tuner and the FS-10's clear LED display will guide you into tune.
- Powered By The Amp: As well as sending a wealth of control information to your amp, the FS-10 cleverly takes its power from the amp too. A regular guitar lead is all you need to connect your ID:Series amp and your FS-10.
- Clear LED Display: From Patch and Bank selection to effect Tap tempo, the FS-10 tells you everything you need to know about your ID:Series amp at a glance, using a clear and bright LED display.