12" Powered Speaker


Call for price! Not available online.

Recommended Accessories

Conceived, engineered and built with precision in the United Kingdom, VXP Series represents a brand new evolution in Tannoy’s core philosophies in self-powered loudspeaker design. Tannoy VXP 12.2Q combines the technological refinement of the passive VX 12.2Q with the brand new IDEEA™ integrated power module from Lab.gruppen. The result is an ultra-reliable and efficient, self-powered loudspeaker offering a punchy and sonically superior solution for medium scale sound reinforcement. The VXP 12.2Q has also been acoustically matched with the wider range of VXP Series models, making it a perfectly capable component within much larger installations.

At the heart of the IDEEA module is a patented Class D output stage capable of high power levels with very low distortion and minimal current draw – all with a net operating efficiency in excess of 80%. A universal switching power supply accepts any mains voltage from 70 – 265 V ( /- 10%) at 50 Hz or 60 Hz through the appropriate IEC cord. In Auto mode, the speaker turns on with signal present and switches to standby mode after 20 minutes of no input, in doing so reducing power consumption to less than 1 W (while in standby). Manual control mode allows the speaker to be turned on and off as required. Also provided is a switchable 90 Hz high-pass filter for use when adding a subwoofer.

Audio connection is via female XLR and power via PowerCON (included) on rear panel. VXP 12.2Q is available in black or white textured paint finish as standard, with matching grilles, and is also available in custom matched RAL colours as an option.


  • 305mm (12”) PowerDual full-range driver with QCW delivering best of both worlds – true point source combined with new horn design, resulting in less unwanted shading effects
  • Discrete 305mm (12”) bass driver for extended LF performance.
  • Tightly controlled 75 x 40 degree dispersion for optimum coverage and forward gain
  • Peak output 131 dB
  • Integrated Lab.gruppen IDEEA electronics providing ultra-reliable Class D amplification
  • Versatile mounting via optional custom designed hardware
  • Available in black or white textured paint finish – custom colours optional
  • XLR input and link, PowerCON mains (included)


  • Frequency Response (-3 dB) (1) Full Range Mode:  60 Hz – 25 kHz
  • Frequency Range (-10 dB) (1) Full Range Mode:  47 Hz - 30 kHz
  • Frequency Response (-3 dB) (1) Hi-Pass mode:  100 Hz – 25 kHz
  • Frequency Range (-10 dB) (1) Hi-Pass mode:  80 Hz – 30 kHz
  • Dispersion (-6dB):  75 degrees (H) x 40 degrees (V)
  • Driver Complement:
    1 x 305 mm (12.00”) PowerDual™ with Q-Centric waveguide
    1 x 305 mm (12.00”) bass driver
  • Crossover  Passive 300 Hz and 1.5 kHz
  • Directivity Factor (Q)  13.0 (averaged 1 kHz to 8 kHz)
  • Directivity Index (DI)  11.1 (averaged 1 kHz to 8 kHz)
  • Rated Maximum SPL (2)
    Average: 125 dB
    Peak: 131 dB
  • Enclosure: 57 litre, 15 mm (enclosure) and 18 mm (front) birch plywood, vented and internally braced.
  • Finish:  Textured black or white paint, with custom colours on request. Powder coated perforated steel grille, Airnet cloth behind
  • Connectors: 1 x female XLR (input), 1 male XLR (link), 1 x Neutrik Powercon
  • Controls & Indicators
    Level Control
    Power LED (Blue)
    Signal LED (Green)
    Limit/Protect LED (Red)
    Full Range / HighPass Switch (110Hz)
    Power Mode Switch
    Power Switch
  • Fittings  8 x M10 Flying inserts (portrait or landscape mounting), 8 x M10 yoke bracket inserts
    2 x Integrip carrying handle
    Blanking plate for optional VTH pole mount
  • Dimensions (H x W x D): 30.7" x 14.6" x 14.1"
  • Net Weight: 77.2 lbs
  • Maximum signal input for clip  'Input attenuator at Maximum: 4.5 dBu (Hard clip will occur at 14.5 dBu input signal)
  • Dynamic Range  '106 dB
  • Efficiency  >90%
  • Damping Factor  >400 ref 8 ohm at 1 kHz
  • Distortion  <0.05% @ 1 kHz -3 dB output (22 kHz bandwidth)
  • Input Impedance  10 kohm unbalanced, 20kohm balanced
  • Protection systems
    Over Current: Output current limiter, always active
    Clip limiter: Output voltage clip limiter, always active
    Temperature: Over temperature causes protective mute
    Brownout: Automatic protection & recovery
    Mains: Inrush current limiter
    Indicators: 1x Power LED, 1x signal LED, 1x Limit LED (Power LED: Red = StandBy, Green = On, Yellow = Temperature protection active)
  • Amplifier Type  Inherently bridged, globally modulated, high performance single channel class D.


  • Input Connector  Locking Neutrik Powercon
  • Voltage Selection  Universal mains input
  • Type  High efficiency, regulated switch mode power supply
  • Efficiency  >85% typical
  • Input voltage  100Vac-240Vac /- 10%, 50-60 Hz /-10%
  • Mains fuse  Internal
  • Fuse type  3,15AT
  • Other features  Inrush current limiter
  • StandBy power consumtion  <1 W
  • Idle power consumption  <15 W
  • Maximum power consumtion  300 W
Wall Hanging Mount, BlackTannoy VMB Wall Hanging Mount, Black

The Tannoy VMB Wall Hanging Mount (part no. 8001-2800) is designed to facilitate a single-point hang of VX and VXP loudspeakers in conjunction with the appropriate horizontal yoke for that product, allowing for precise angles of tilt ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Our Price:$106.07List Price: $169.00You save 37%!

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.