(0)

Questions? Call Us:
800-356-5844

Williams Sound WIR TX75 S
IR Emitter Multi-Channel Slave

OUR PART #:  WIR-TX75-S

The WIR TX75-S infrared slave emitter can be added to the WIR TX75 mid-range infrared transmitter for additional coverage of up to 5,000 square feet...
Learn More
Our Price: $421.00
List Price: $468.00
You save 10%!

Full Compass offers free ground shipping on thousands of stock and non-stock (special order) items for orders placed on this web site and shipping in the continental US (48 states).

Learn More

Free Shipping

Available

We guarantee to match pricing on the products we sell for new, identical and immediately available products if you see them offered at a lower price. Please contact us if you find a lower price before purchasing.

Learn More

Low Price

Guaranteed

Williams Sound WIR TX75 S
Qty:
Usually ships in 7-14 business days.
Need it sooner? Call us!

Similar Products
The WIR TX75-S infrared slave emitter can be added to the WIR TX75 mid-range infrared transmitter for additional coverage of up to 5,000 square feet, when mounted up to 100 feet from the master emitter. A maximum of two slaves can be added for up to 15,000 square feet total coverage. Placing additional slaves in the same room increases coverage and enhances freedom of movement. A single CAT5 cable carries both power and signal from the WIR TX75 to the slaves – truly a one-cable connection.  Linking bar and mounting bracket are included.

System includes:

  • (1) WIR TX75-S infrared slave emitter
  • (1) WCA 096 12” CAT5 cable
  • (1) WCA 091 25’ CAT5 cable
  • (1) MLB 003 slave linking bar
  • (1) BKT 024 wall/ceiling mounting bracket

Features:

  • Add to the WIR TX75 mid-range infrared transmitter for additional coverage of up to 5,000 square feet.
  • Truly a one-cable connection- a single CAT5 cable carries both power and signal from the WIR TX75 to the slaves.

Specifications:

  • Dimensions, Weight: 10.0” W (25.4 cm) x 3.1” D (7.9 cm) x 1.5” H (3.8 cm) w/o faceplate or 2.5” H (6.4 cm) w/faceplate, 0.6 lbs (0.3kg)
  • Color: Black with silver colored silk screen and silver colored faceplate
  • Optional: white colored faceplate
  • Sleep/Power Save Mode: Shuts off carrier when no audio is present for 3 minutes
  • Modulation: FM Wideband, ±50kHz deviation max, 50 µS pre-emphasis
  • Carrier Frequencies: 2.3MHz (Ch1) and 2.8MHz (Ch2). Default at power on = carriers off. Carriers are automatically enabled upon presence of audio.
  • Emitter IR Power: 0.7 W
  • Slave Coverage Area
    (minimum, 1-ch mode):
    Note: Slave emitter cannot be used without a master transmitter, but if the slave emitter is aimed so that its coverage area does not overlap that of the master, on its own it will provide:
    5,000 sq. ft in single-channel mode with the RX22-4 receiver (464 sq. m)
    3,000 sq. ft in single-channel mode with the RX15-2 receiver (279 sq. m)
    2,000 sq. ft in single-channel mode with the RX18 receiver (186 sq. m)
  • Master + Slave Coverage Area (minimum, 1-ch mode)
    If slave transmitters are aimed to maximize coverage area (so that their coverage areas minimally overlap that of the master):
    10,000 sq. ft in single channel mode with the RX22-4, a master and (1) slave transmitter (929 sq. m)
    15,000 sq. ft in single channel mode with the RX22-4, a master and (2) slave transmitters (1,393 sq. m)
  • Indicators On/Off: 2-position switch turns on/off indicator lights
  • Signal-to-Noise Ratio: 70 dB, (line input)
  • Frequency Response:
    95Hz to 17.6kHz, -3dB re 1kHz (line input)
    125Hz to 17.0kHz, -3dB re 1kHz (microphone input)
  • Total Harmonic Distortion: <1% (1 kHz, nominal deviation, line or microphone input)
  • From Master Input 8p8c RJ45 connector input provides 48VDC 0.4A power, baseband RF, and a bi-directional RS-485 bus for control and status communications.
  • Slave Extension Cable: CAT-5e (or better) cable, maximum 100’ length, with RJ-45 8P8C male connector on each end, TIA568B
  • Slave Status Indicators
    (on “to slave” jacks):
    Green: Power/Unit Status
    Yellow: Transmit/Cable Status
  • Operating Requirements: 0-50° C (32°-122°F)
  • Mounting Kit: Wall or Ceiling mount: BKT 024 Omnidirectional mount
  • Optional: slave linking bar (MLB 003)
  • Warranty: 2 Years
  • Approvals: CE, C-tick, FCC, Industry Canada, WEEE, RoHS, CB Scheme
  • Compatible Receivers: WIR RX22-4, WIR RX18, WIR RX15-2
Mounting Bracket for WIR TX9
Williams Sound BKT024 Mounting Bracket for WIR TX9
Omnidirectional wall or ceiling mount for WIR TX9 Emitter
38.70 43.00 10
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.