(0)

Questions? Call Us:
866-334-8859

Shure FP15/83-J3
Portable Wireless Lavalier Microphone System, J3 Band 572 - 596 MHz

OUR PART #  FP15/83-J3

Our Price: $499.00
List Price: $624.00
You save 20%! (Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

Recommended Accessories
The Shure FP15/83-J3 is a portable wireless lavalier microphone system with the WL183 omnidirectional lavalier microphone, FP1 bodypack transmitter and the FP5 portable receiver. This system operates on the J3 frequency band, which covers 572 MHz to 596 MHz.

When portability is required, FP Wireless and its intuitive, flexible components are the ideal solution. FP Wireless features proven wireless technology, including Shure patented Audio Reference Companding, for professional sound capture in demanding videography and electronic field production (EFP) environments.

Shure FP15/83-J3 Includes:

  • One (1) FP1 Bodypack Transmitter
  • One (1) FP5 Portable Receiver
  • One (1) WL183 Omnidirectional Lavalier Microphone
  • One (1) Tie Clip
  • One (1) Camera Shoe Mount
  • One (1) TA3F to XLRm Audio Cable
  • One (1) TA3F to 3.5mm Dual-Mono Audio Cable
  • Four (4) AA Batteries
  • Two (2) Vinyl Bags
  • User Guide

Shure FP15/83-J3 Features:

  • Shure patented Audio Reference Companding for crystal-clear audio
  • Automatic frequency selection locates an open frequency at the touch of abutton
  • Automatic transmitter setup instantly syncs the transmitter to thereceiver frequency
  • Up to 20 compatible systems simultaneously
  • All components powered by 2AA batteries – no power cord required
  • Transmitter gain attenuation control manages input level
  • Receiver output level control manages output to camera/mixer
  • Diversity antennas for consistent reception of signal transmission
  • Rugged and reliable Shure construction
  • Compatible with all Shure wireless microphones capsules
  • All components compatible with SLX® Wireless systems

Shure FP15/83-J3 Specifications:

  • FP5 Portable Receiver:
    • Audio Output:  Type TA3F
    • Configuration:  Impedance balanced
    • Pin Assignments: 
      • Pin 1:  Ground
      • Pin 2:  Hot
      • Pin 3:  Cold
    • Maximum Audio Output Level (Ref. +/- 38 kHz deviation with 1 kHz tone):  –5 dBV (into 600 Ohm load)
    • Impedance:  200 Ohms
    • Dimensions (HxWxD):  108 mm X 64 mm X 19 mm
    • Weight:  3 oz. (81 g)
    • Housing:  Molded polycarbonate case
    • Sensitivity:  –108 dBm for 12 dB SINAD, typical
    • Power Requirements:  2 AA batteries, 1.5V
    • Battery Life:  Up to 12 hours (alkaline)
  • FP1 Bodypack Transmitter:
    • Gain Adjustment Range:  -10 to +20 dBV
    • Input Impedance:  1 MegOhm
    • RF Output Power:  10 to 30 mW (varies by region)
    • Pin Assignments (TA4M):
      • Pin 1:  Ground (cable shield)
      • Pin 2:  +5 V Bias
      • Pin 3:  Audio
      • Pin 4:  Tied through active load to ground (On instrument adapter cable, pin 4 floats)
    • Dimensions (HxWxD):  108 mm x 64 mm x 19 mm
    • Weight:  3 oz. (81 g), without batteries
    • Housing:  Molded polycarbonate case
    • Power Requirements:  2 AA batteries, 1.5 V
    • Battery Life:  Up to 12 hours (alkaline)
  • WL183 Lavalier Microphone:
    • Polar Pattern:  Omnidirectional
    • Type:  Condenser (electret bias)
    • Frequency Response:  50 Hz - 17 kHz
    • Impedance:  1800 Ohms
    • Output Level:  -40.0 dBV/Pa
Molded Case for Shure FP WirelessSKB Cases 3I-0907-4-SFP Molded Case for Shure FP Wireless

The 3i0907-4SFP Custom interior Shure FP Wireliess System Mic case is a very compact case and is part of the iSeries Waterproof cases. iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$74.99List Price: $124.99You save 40%!

Click to download

Shure FP15/83-J3
Portable Wireless Lavalier Microphone System, J3 Band 572 - 596 MHz

OUR PART #  FP15/83-J3

Product Videos:

Product Information:

The Shure FP15/83-J3 is a portable wireless lavalier microphone system with the WL183 omnidirectional lavalier microphone, FP1 bodypack transmitter and the FP5 portable receiver. This system operates on the J3 frequency band, which covers 572 MHz to 596 MHz.

When portability is required, FP Wireless and its intuitive, flexible components are the ideal solution. FP Wireless features proven wireless technology, including Shure patented Audio Reference Companding, for professional sound capture in demanding videography and electronic field production (EFP) environments.

Shure FP15/83-J3 Includes:

  • One (1) FP1 Bodypack Transmitter
  • One (1) FP5 Portable Receiver
  • One (1) WL183 Omnidirectional Lavalier Microphone
  • One (1) Tie Clip
  • One (1) Camera Shoe Mount
  • One (1) TA3F to XLRm Audio Cable
  • One (1) TA3F to 3.5mm Dual-Mono Audio Cable
  • Four (4) AA Batteries
  • Two (2) Vinyl Bags
  • User Guide

Shure FP15/83-J3 Features:

  • Shure patented Audio Reference Companding for crystal-clear audio
  • Automatic frequency selection locates an open frequency at the touch of abutton
  • Automatic transmitter setup instantly syncs the transmitter to thereceiver frequency
  • Up to 20 compatible systems simultaneously
  • All components powered by 2AA batteries – no power cord required
  • Transmitter gain attenuation control manages input level
  • Receiver output level control manages output to camera/mixer
  • Diversity antennas for consistent reception of signal transmission
  • Rugged and reliable Shure construction
  • Compatible with all Shure wireless microphones capsules
  • All components compatible with SLX® Wireless systems

Shure FP15/83-J3 Specifications:

  • FP5 Portable Receiver:
    • Audio Output:  Type TA3F
    • Configuration:  Impedance balanced
    • Pin Assignments: 
      • Pin 1:  Ground
      • Pin 2:  Hot
      • Pin 3:  Cold
    • Maximum Audio Output Level (Ref. +/- 38 kHz deviation with 1 kHz tone):  –5 dBV (into 600 Ohm load)
    • Impedance:  200 Ohms
    • Dimensions (HxWxD):  108 mm X 64 mm X 19 mm
    • Weight:  3 oz. (81 g)
    • Housing:  Molded polycarbonate case
    • Sensitivity:  –108 dBm for 12 dB SINAD, typical
    • Power Requirements:  2 AA batteries, 1.5V
    • Battery Life:  Up to 12 hours (alkaline)
  • FP1 Bodypack Transmitter:
    • Gain Adjustment Range:  -10 to +20 dBV
    • Input Impedance:  1 MegOhm
    • RF Output Power:  10 to 30 mW (varies by region)
    • Pin Assignments (TA4M):
      • Pin 1:  Ground (cable shield)
      • Pin 2:  +5 V Bias
      • Pin 3:  Audio
      • Pin 4:  Tied through active load to ground (On instrument adapter cable, pin 4 floats)
    • Dimensions (HxWxD):  108 mm x 64 mm x 19 mm
    • Weight:  3 oz. (81 g), without batteries
    • Housing:  Molded polycarbonate case
    • Power Requirements:  2 AA batteries, 1.5 V
    • Battery Life:  Up to 12 hours (alkaline)
  • WL183 Lavalier Microphone:
    • Polar Pattern:  Omnidirectional
    • Type:  Condenser (electret bias)
    • Frequency Response:  50 Hz - 17 kHz
    • Impedance:  1800 Ohms
    • Output Level:  -40.0 dBV/Pa
Molded Case for Shure FP WirelessSKB Cases 3I-0907-4-SFP Molded Case for Shure FP Wireless

The 3i0907-4SFP Custom interior Shure FP Wireliess System Mic case is a very compact case and is part of the iSeries Waterproof cases. iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Free Shipping Available

Our Price:$74.99List Price: $124.99You save 40%!

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.