Audio-Technica AT-VM95ML Microlinear Phonograph Cartridge

The VM95 Series cartridge, equipped with a 2.2 x 0.12 mil Microlinear stylus, is specifically designed to be compatible with half-inch mount turntables. This cartridge delivers exceptional tonal quality through its remarkable channel separation and low distortion properties. The housing of the cartridge is constructed to be durable and low-resonance, providing optimal performance. Additionally, the cartridge is designed with threaded inserts, enabling it to be effortlessly mounted to the headshell using just two screws, eliminating the need for additional nuts. Furthermore, the VM95 Series cartridges share a unified body design, allowing for interchangeability of the stylus with any of the six AT-VMN95 replacement styli.

Audio-Technica AT-VM95ML Features:

• VM Series dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus
• Aluminum cantilever
• Durable low-resonance polymer housing
• Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
• Compatible with any AT-VMN95 replacement stylus

Audio-Technica AT-VM95ML Specifications:

• Cartridge & Stylus:
  • Frequency Response: 20-25,000 Hz
  • Channel Separation: 23 (dB at 1 kHz)
  • Vertical Tracking Angle: 23°
  • Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
  • Stylus Construction: Nude square shank
  • Recommended Load Impedance: 47,000 ohms
  • Coil Impedance: 3.3 k ohms (1 kHz)
  • DC Resistance: 485 ohms
  • Coil Inductance: 550 mH (1 kHz)
  • Output Voltage: 3.5 mV (1 kHz, 5 cm/sec.)
  • Output Channel Balance: 1.5 dB (1 kHz)
  • Stylus Shape: 2.2 x 0.12 mil Microlinear
  • Cantilever: Aluminum pipe
  • Static Compliance: 20 x 10 – 6 cm / dyne
  • Dynamic Compliance: 10 x 10 – 6 cm / dyne (100 Hz)
  • Mounting: Half-inch
  • Cartridge Weight: 6.1 g
  • Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
  • Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
  • Mounting Feature: Half-inch mount
  • Recommended Load Capacitance: 100 to 200 pF
  • Replacement Stylus: AT-VMN95ML
  • Stylus Size: 2.2 x 0.12 mil
  • Type: VM Stereo Dual Magnet
  • Weight: 6.1 g (0.22 oz)
  • Wire Used for Coil: T.P. Copper