Audio-Technica AT-VM95SH Dual Moving Magnet Cartridge 2.7 x 0.26 mil

Audio-Technica AT-VM95SH Dual Moving Magnet Cartridge, 2.7 x 0.26 mil

From Audio-Technica’s VM95 Series of cartridges, the AT-VM95SH fits half-inch mount turntables and is equipped with a 2.7 x 0.26 mil Shibata stylus. The cartridge delivers outstanding channel separation with low distortion to provide excellent tonal quality. Its rugged, low-resonance housing incorporates threaded inserts enabling the cartridge to be mounted to the headshell using just 2 screws with no nuts required. Because all VM95 Series cartridges share the same body, the stylus can be replaced with any of the six interchangeable AT-VMNN95 styli.

Audio-Technica AT-VM95SH Features:

• Dual magnet cartridge with 2.7x 0.26 mil Shibata stylus
• Sturdy low-resonance polymer housing
• Aluminum cantilever
• Threaded inserts allow 2-screw mounting with no nuts needed
• Compatible with any AT-VMN95 replacement stylus

Audio-Technica AT-VM95SH Specifications:

• Channel Separation: 23dB at 1kHz
• Frequency Response: 20Hz to 25kHz
• Vertical Tracking Angle: 23-degrees
• Vertical Tracking Force: 1.8 – 2.2 grams (2.0 grams standard)
• Stylus Construction: Nude square shank
• Output Voltage: 3.5 mV (1kHz, 5 cm/sec)
• Output Channel Balance: 1.5dB (1kHz)
• Recommended Load Impedance: 47k Ohms
• Coil Impedance: 3.3k ohms (1kHz)
• Coil Inductance: 550mH (1kHz)
• DC Resistance: 485 ohms
• Mounting: Half-inch
• Cartridge Weight: 0.22 oz. (6.1 grams)
• Dimensions: 0.68” high x 0.74” wide x 1.20” deep (17.2 x 18.9 x 28.3 mm)
• Included Accessories: 2x 11mm mounting screws, 2x 8mm mounting screws, 2x washers, nonmagnetic screwdriver