Mackie FKDRM18S Flyware Kit for DRM18S Active & Passive, FB100 Required

If you're going to fly your Mackie system, you want to be sure it's secure and poses no risk to the crew, crowd, or performers. The FKDRM18S is a kit designed by Mackie to be used with the FB100 Flybar (sold separately) specifically to fly their DRM18S subwoofer (sold separately). Each DRM18S requires it's own FKDRM18S flyware kit, and in conjunction with the FB100 you can fly 2 DRM18S and up to 4 DRM12A loudspeakers.

The FKDRM18S can help deliver the sound and coverage you want and the peace of mind you need.

WARNING: This product has been designed for installation only by qualified and licensed personnel having the technical know-how and experience of the operations involved to prevent any risk to personal safety. When installing this product, always respect the safety standard. Do not install the product in any way that is not described in the included instructions.

WARNING: The DRM18S rigging kit has been tested to a Working Load Limit (WLL) of 452 lbs. / 205 kg with a design factor of 10:1. This rigging kit may hold up to two DRM18S subwoofers [102 lbs. / 46.3 kg each] and four DRM12A loudspeakers [62 lbs. / 28.1 kg each] in succession. Never apply a load that exceeds the Working Load Limit.

Before suspending the loudspeaker(s), make all of the necessary calculations to ensure that all of the components are used within their nominal work load range. Remember that the weakest component determines the safety level of the entire installation.

Includes

• 2x Screw, M4.8 x 19mm Long
• 2x Rubber foot
• 4x Screw, M10 x 55mm Long
• 2x Fly Bar
• 2x Screw, M10 x 30mm Long
• 2x Lock washers, M10
• 2x Flat washers, M10
• 1x FB100 Rear Brace (brace only – flybar sold separately)
• 2x Screw, M6 x 30mm Long
• 2x Lock washers, M6
• 2x Flat washers, M6
• 2x Nuts, M6