Speaker Mounts

The LA108-KIT-SA is an adapter kit for use with the LA108-AF when deploying the LA108 loudspeaker in a ground stack configuration. All items are sold separately.

The ATM Flyware PoleStar PM-24-6UP-G UniFrame is a complete mounting solution for outdoor loudspeakers. Its design combines the attributes of the PoleStar stainless “a-la-carte” version into just two models produced in steel and then g ...

All band kits include two stainless steel straps and fasteners.

Array frame for suspending up to 6 VRX932LA enclosures. Includes 4 x Quick Release Pins, 2 x Shackles, 2 x Drop Levers. Ease of set up and takedown is critical to ensuring high quality sound reinforcement that meets both time and cost rest ...

Rigging system for Event 208A. Includes pick-up bar (1), attachment parts (2) and safety pins.

The PoleStarTM PM-Band-20S Kit is a pair of 20" all weather, stainless steel banding straps designed to attach the PoleStarTM Pole Adapters to 2” dia. to 6” dia. poles.

The SAS-200-24 from Allen Products is an efficient, load rated universal wall arm system for mounting objects, such as loudspeakers weighing up to 200 lbs (91 kg) to walls and other vertical structures. A loudspeaker can easily be attached ...

The LA112-AF array frame attaches to the top of one LA112 and fly up to five additional LA112s in an array configuration. The LA112-AF is intended for use only with the LA112 loudspeaker. All items are sold separately.

This powder coated steel yoke is specifically for mounting the E12 speaker series to structures.

Community offers the PMB Series Pole Mount Bracket Kits for mounting small R-Series and small WET Series loudspeakers to poles and columns. These brackets were designed for use with R.25 and R.5 loudspeakers, but can also be used with Comm ...

This 3-pack of M10 x 35 mm forged shoulder steel eyebolts is designed for use with the JBL speakers' M10 suspension points for easy rigging.

Adaptive Technologies OSRV3-1800 allows you to hang points where you need them with this off-set anchor fitting. Avoid side loads with this high strength, load rated suspension fitting. The fitting rotates 360 degrees and aligns from overh ...

The Allen Products MM-3RDX-18 is an adjustable ceiling speaker mount that provides pan, tilt & roll adjustments. It supports and aims speakers that are equipped with either the 2 x 4-1/4 or the 2-3/4" x 5" 4-point mounting pattern. This mo ...

The One-Way-Array is an easy use load-rated and off the shelf loudspeaker rigging and aiming system for single loudspeakers. It is ideal for aiming sound in left and right of house configurations and provides spot coverage where speakers c ...

JBL's MTC-28UB-1 U-bracket mounts JBL Control 28-1 or Control 28-1L surface-mount loudspeakers to walls, decks, and ceilings while providing swiveling capability. Available in Black or White.

The ABX200 RSX212L and RSX18F Transition Fly Bar is an essential component for audio professionals and event organizers looking to create seamless transitions and dynamic setups in their sound reinforcement systems. Designed for use with t ...

Pair of Manual Chain Hoists - Operated by manual labor without requiring electricity. Each chain boasts a 1-ton capacity load bearing rating. Comes with a chain bag for each hoist and a Heavy Duty case to store both hoists. Perfect for sta ...

The Electro-Voice Mb200W is a wall/ceiling mount bracket kit for Electro-Voice Sx300, Sx100+, SxA100, and Sb121 speakers. This particular model comes in white wrinkle powder coat finish. Shipping weight is 8.5 lbs (3.86 kg).

Allen Products' MultiMount MM-120 Speaker Mount supports speakers weighing up to 120 lbs., is fully adjustable in both pan and tilt aiming, and comes with a telescoping wall arm to adjust the relative distance between the speaker and the w ...

The QSC K12.2 Yoke Mount Kit features a powder coated steel yoke for mounting the K12.2 vertically or horizontally to walls, beams, or other structures.

The Community C6-CATR can adapter/trim ring for retrofit installations of a C6 ceiling loudspeaker into an existing larger industry back can or into an existing but oversized ceiling hole up to 11 inches (279mm) in diameter.

The Electro-Voice ZLX-BRK is a wallmount bracket for the ZLX Series loudspeakers. Fits the ZLX-12, ZLX-12P, ZLX-15, and ZLX-15P.

The 24486 Speaker Ceiling Mount by Genelec is an exceptional solution for elevating the auditory experience in any space. Engineered with precision and durability in mind, this ceiling mount is designed to seamlessly integrate Genelec spea ...

QSC's CP8 YOKE is specifically designed for use with their CP8 loudspeaker (sold separately), and mounts the loudspeaker onto the yoke, allowing for rigid mounting to structures and rotation of the loudspeaker system. The yoke had threaded ...