Lowell LPTR2-1419 Pull & Turn Rack for Built-in Applications in Black

For superior access to equipment in cabinets or millwork, the LPTR2-1419 Pull & Turn Rack from Lowell is ideal for built-in applications. The top section of this 14U rack slides forward and turns (left or right), locking at several positions, thereby providing superior access to equipment connections.

To operate, simply remove the front security panel, grasp rails and pull rack firmly towards you, sliding it along rails in the base (locks when fully forward). To rotate, press center button to release turntable and rotate left or right (locks at 60 and 90 degrees). To return, rotate back to 0 degrees and depress right tab to release lock and slide back into base.

Features

• Removable base mounts flush or recessed (up to 1.75 in.)
• Integral turntable with push-button release
• Two bottom rail slides (for loads to 125 lbs.)
• 11-gauge steel corner post mounting rails tapped 10-32
• Front security panel attaches with screws
• Six cable lacing bars
• Black powder epoxy finish
• Ships unassembled (two cartons)

Specifications

• SKU: LPTR2-1419
• Color: Black
• Panel Space: 14U or 24.50" [622mm]
• Overall Height: 27.08" [688mm]
• Overall Depth: 19.22" [488mm]
• Pulled-out Depth: 38.30" [973mm]
• Overall Width: 19.13" [486mm]
• Useable Depth: 19"
• Bottom Slide Rails: 2
• Construction: 14-ga. certified U.S. steel base and 11-ga. corner post rails with smooth black powder epoxy finish.
• Mounting Rails: Includes four (14U) 11-ga. steel corner post mounting rails tapped 10-32 with bi-directional numbered RU increments to mount in either direction, plus two rear rails (12U) for wire tie-off.
• Cable Management: Six rear cable lacing bars. Obrounds in side panels and base. Lower section of base has a large central opening.
• Hardware: Pilot point screws with captive washers for quick assembly
• Compliance: EIA/TIA compliant. RoHS compliant.
• Load Capacity: Two (2) bottom slide rails support total load capacity of 125 lbs.