DPA 6060-OC-U-B00 6060 Omni Submini Mic, Normal SPL, Black, MicroDot

Small in size, but packed with reliable clarity DPA's 6060 subminiature Microphones are only 3mm in diameter with all the award-winning, powerful performance you expect. Shrunk to an impressive miniature size, the 6060 delivers clarity, consistency, and durability at the heart of the mic. From loud to soft, you will experience increased clarity and openness with minimized distortion.

Extremely durable cables are equipped with an inner core made of Kevlar to withstand rough pulls and avoid tangles, while a strain relief is also integrated in the mic housing for additional strength.

This series is able to tolerate high temperatures, impacts, and is resistant to abrasion with its stainless steel construction and Physical Vapor Deposition (PVD) coating. The cap is also removable for cleaning. As mics are typically connected to a wireless belt pack, both cable and capsule are designed to ensure immunity to noisy wireless devices and with a comprehensive mix of adapters, you will be sure to find the perfect mic to suit your wireless transmitter.

In black, the 6060-OC-U-B00 specifically comes with a MicroDot connector.

Applications

Speech (typical lavalier mic)

Close-Mike for Instruments

Features

• Amazing 3 mm capsule technology
• Renowned DPA sound in a 60% smaller package
• Stainless steel, PVD-coated mic housing
• Modular adapter system fits most professional wireless systems
• MicroDot Termination and Black finish

Specifications

• Connector: MicroDot
• Color: Black
• Directional pattern: Omnidirectional
• Principle of operation: Pressure
• Cartridge type: Pre-polarized condenser
• Frequency range: 20 Hz - 20 kHz
• Frequency range, ±2 dB: 40 Hz - 20 kHz with 4 dB soft boost at 8 - 20 kHz
• Sensitivity, nominal, ±3 dB at 1 kHz: 20 mV/Pa; -34 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 24 dB(A) re. 20 μPa (max. 26 dB(A))
• S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 70 dB(A)
• Total harmonic distortion (THD): < 1% up to 126 dB SPL peak
• Dynamic range: Typ. 102 dB
• Max. SPL, peak before clipping: 134 dB
• Output impedance: From MicroDot: 30 - 40 Ω. From DAD6001-BC: 100 Ω
• Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR adapter
• Power supply (for full performance): Min. 5 V to max. 10 V through DPA adapter for wireless systems. With DAD6001-BC: 48 V phantom power ±4 V for full performance. Works from 12V
• Weight: 0.29 oz incl. Cable and MicroDot connector
• Microphone head size (h x w x d): 3.4 / 14.4 mm
• Capsule diameter: 3 mm
• Cable length: 1.8 m (5.9 ft)
• Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin