Product Overview
An instrument pickup microphone system — in this case specially-designed for use with pianos, the Audio-Technica ATM350PL UniMount® mounting system gives you the tools to perform with confidence. This system features the ATM350a cardioid condenser microphone, a high-SPL (sound pressure level) mic that delivers a clear, well-balanced audio response from any instrument. When it's used with the included AT8491P magnetic piano mount plus the strong, flexible AT8490L 9" gooseneck, this mic can be securely affixed to any metal portion of the piano, and positioned to stay where you want it.
The ATM350a mic’s polar pattern isolates desired instrument's signal through the reduction of side and rear pickup, and its switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency (LF) noise. This system also includes an AT8468 violin mount with hook-and-loop fastener as well. and a protective carrying case.
Includes
- ATM350a cardioid condenser microphone
- AT8543 power module
- AT8491P UniMount® magnetic piano mount
- AT8490L UniMount® 9" gooseneck
- AT8468 Violin mount (hook-and-loop fastener)
- Protective carrying case
Features
- Low-profile mic design for minimum visibility
- Crisp, clear, well-balanced microphone response, even at high SPLs
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- UniMount® magnetic piano mount attaches securely to the frame or other metal part of the piano, and provides excellent shock resistance for the microphone
- Rugged UniMount® 9" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
- In-line power module is equipped with a switchable 80Hz high-pass filter to control undesired LF ambient noise
- Interchangeable elements available for hyper cardioid and omnidirectional polar patterns (sold separately)
- Included violin mount with hook-and-loop fastener provides an additional mounting option
Specifications
- Element: Fixed-charge back plate, permanently-polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 40 – 20,000 Hz
- LF Roll-Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V @ 1Pa
- Impedance: 200 Ω
- Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1%T.H.D.
- Dynamic Range (typical): 130 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 65 dB, 1 kHz @ 1 Pa
- Phantom Power Requirements: 11 - 52 VDC, 3.5 mA, typical
- Switch: Flat, roll-off
- Weight, Microphone: 0.5 oz. (14.5 g)
- Weight, Power Module: 3.2 oz. (90 g)
- Dimensions, Microphone (L x max. body Ø): 1.49" x 0.48" (37.8 x 12.2mm)
- Dimensions, Power Module (L x Ø): 3.62" x 0.74" (92 x 18.9mm)
- Output Connector, Power Module: Integral 3-pin XLRM-type
- Cable: permanently attached to microphone, (L x Ø) 13.1' x 0.13" (4.0m x 3.2mm), 2-conductor shielded, with HIROSE HR10-type connector
- Note: further information can be found within the items located under the "Documentation" tab above.
