Product Overview
The RS-701 is a single-channel analog beltpack from Clear-Com that can carry power and audio through the XLR-3 line connector. Fully compatible with current and previous Clear-Com analog partyline systems, the RS-701 beltpack combines high headroom, low-noise audio and shaped frequency contour (the “Clear-Com Sound”) to deliver clear audio.
The RS-701 features LEDs on the top of the beltpack for visual indication of incoming and outgoing call signaling. A mic preamp enables intelligible voice communication for every volume level. Recessed rotary volume control, Talk and Call keys guard against accidental activation. The RS-701 has a low operating current to allow for more beltpacks in a daisy-chain.
Features
- Rugged Single-Channel Beltpack with XLR-3 Connector
- Recessed rotary volume control, Talk key and Call key guard against accidental activation
- Fully compatible with all current and previous model Clear-Com analog party line systems
- Simple options set-up with concealed, programmable DIP switches
- Talk and Call switches easy to locate in dark environments
- Low operating current for more beltpack chaining
- Visual LED indicators on top of keypad
- Tactile buttons for Call and Talk
- “Clear-Com Sound” offers intelligible audio
Specifications
- NOTE: dBu is an absolute measurement. 0 dBu is referenced to 0.775 volts RMS
- Microphone Pre-Amplifier:
- Mic to Line (without limiter acting)
- Frequency Response: 280 – 15k Hz ± 3dB
- Microphone output to line – Audio Level (-50dBm Electret input): -9dBm
- Microphone output to line – Distortion: < 0.1%
- Microphone output to line – Signal to Noise: >65dB
- Headphone Pre-Amplifier:
- Frequency Response – Line to Headphone: 150 – 20k Hz ± 3dB
- Headphone input from line – Audio Level (-9dBm Electret input): 3.5dBm
- Headphone input from line – Distortion: < 0.5%
- Headphone input from line – Signal to Noise: >50dB
- Earphone to Mic – Crosstalk: >80dB
- Sidetone – Adjustment Range (-80db mic input): >45dB
- Keypad Indicators:
- Power: Green LED
- Talk: Green LED
- Call: Orange LED
- Connectors:
- Intercom Line: (2) 3-pin XLR–M–F
- Ch. 1 2-Wire
- Intercom Channel:
- Pin 1: Common
- Pin 2: PL Power (+28VDC)
- Pin 3: Line (Audio)
- Headset: 4-pin XLR–M
- Headset Connector:
- Pin 1: Mic – (Mic Common)
- Pin 2: Mic +
- Pin 3: Spkr-
- Pin 4: Spkr+ (and 0.5*VCC DC, supply between
- Pin 4 and Pin 1)
- Power:
- Input Voltage Range: 12-30 VDC
- Input Current (Idle): < =12mA
- Input Current (Max): < =28mA
- Call Voltage:
- 16.5 VDC
- Minimum Voltage Needed: 3.3V
- Environmental: 32˚F – 158˚F (0˚C – 70˚C)
- Dimensions (HxWxD): 3.4 x 4.5 x 1.7 in (86 x 114 x 43 mm)
- Weight: 10.5 oz (0.30 kg)