Stands, Racks & Mounts

Tannoy provides the Multi-Angle Wall Mount Bracket, specifically designed for the Tannoy VX 5.2, VX 6 and VX 8 Loudspeakers. The Multi-Angle Wall Mount bracket for the VX 5.2, VX 6 and VX 8 Loudspeakers provides optimal accurate listening ...

Tannoy's VariBALL bracket system has been developed to ensure a fast and safe single person install, while allowing for the enclosure to be positioned at the optimum listening angle no matter where the loudspeaker is situated. Once the opt ...

The YOKE HORIZONTAL VX 5.2/VX 6 accessory bracket provides tilt rotation in the long axis of VX 5.2, VX 6 and VXP 6 loudspeakers for accurate audience coverage, and boasts a safety factor of 10:1 allowing unparalleled installation security ...

V Series wall bracket can be used in conjunction with the yoke mount to secure V Series loudspeakers to a wall. The fixing beam has mounting points for attaching the yoke to the mounting surface.

The CMS 803 PI 16 OHM BACKCAN is an acoustically enhanced zinc plated steel back can designed for the pre-installation of CMS 803DC PI loudspeakers in non-suspended ceilings during construction. This low profile back can features flexible ...

Tannoy provides the Back Can for the CMS 603 PI Series Ceiling Loudspeakers (to be mounted/installed before loudspeakers are installed.) The CMS 603 PI 16 OHM BACKCAN is an acoustically enhanced zinc plated steel back can designed for the ...

Tannoy's MULTI ANGLE WALL MOUNT-WH bracket for VX 5.2, VX 6 and VX 8 Loudspeakers (all sold separately) provides accurate listening area focus, thanks to its broad pan and tilt capability. Engineered to provide a 5:1 load factor for the ul ...

The CMS 801/803 Plaster Ring from Tannoy is specifically designed for use with their CMS 801 and CMS 803 loudspeaker models (sold separately). It's intended for pre-installation in newly-constructed, non-suspended ceilings, with strategica ...

 

The Tannoy CMS 503 PI Backcan is an optional pre-install backcan, available for both DC and ICT models and is designed for pre-installation in newly constructed, non-suspended ceilings. Tannoy CMS 503 PI Backcan Specifications: Acousticall ...

The Tannoy VMB Wall Hanging Mount is designed to facilitate a single-point hang of VX and VXP loudspeakers in conjunction with the appropriate horizontal yoke for that product, allowing for precise angles of tilt and rotation, independent ...

The Tannoy CMS1201SW-BACKCAN is a back can sub bank for ceiling subwoofer CMS1201SW Tannoy CMS1201SW-BACKCAN Specifications: Color: White.

The VX 12.2H Horizontal Yoke from Tannoy is custom engineered to facilitate safe, quick and hassle-free mounting of the Tannoy VX 12.2 and VXP 12.2 loudspeaker cabinets, either from a ceiling point or wall surface. The power-coated steel b ...

Tannoy's YOKE HORIZONTAL VX 5.2/VX 6-WH accessory bracket (part no. 8001-7151) provides tilt rotation in the long axis of VX 5.2, VX 6 and VXP 6 loudspeakers for accurate audience coverage, and boasts a safety factor of 10:1 allowing unpar ...

The Tannoy YOKE-VERTICAL-VX12 is a vertical yoke accesssory bracket for the VX 12, VX 12Q, VXP 12, and the VX 12.2 loudspeakers. The YOKE VERTICAL VX 12/VX 12.2 accessory bracket provides tilt rotation in the short axis of VX 12, VX 12Q, V ...

The VARIBALL BRACKET AMS 6/8 from Tannoy is an ideal and cost effective solution designed specifically for users seeking maximum control over the pan and tilt orientation of their AMS 6 and AMS 8 Series surface-mount loudspeakers (sold sep ...

The VTH-TOP-HAT replaces the blanking plate that is included on VX Series loudspeakers, allowing them to be mounted on standard (35 mm) speaker poles for portable use. Designed to utilize the existing hardware for the ultimate in security ...

The POLE MOUNT ADAPTOR from Tannoy has been specifically designed for users who wish to install AMS Series surface-mount loudspeakers onto a standard 3 - 4" (76.2 - 228.6mm) indoor or outdoor support pole. It's an ideal, cost-effective sol ...

The CMS 1201 BACKCAN is an acoustically enhanced zinc plated steel back can designed for the pre-installation of CMS 1201DC loudspeakers in newly constructed suspended and non-suspended ceilings. The back can features an internally damped ...

The POLE MOUNT ADAPTOR is meticulously designed to cater specifically to users seeking to install AMS Series surface mount loudspeakers on standard 3 - 9" (76.2 - 228.6 mm) support poles, whether indoors or outdoors. Crafted from premium z ...

The VX 8.2-WH horizontal yoke offers the control you need to deliver the coverage you want with your VX 8.2 loudspeakers. The bracket provides tilt rotation in the long axis, ensuring positional accuracy and unparalleled installation secur ...

The VX 8.2-BK horizontal yoke offers the control you need to deliver the coverage you want with your VX 8.2 loudspeakers. The bracket provides tilt rotation in the long axis, ensuring positional accuracy and unparalleled installation secur ...

The TA-VX82VERTYOKE-BK is a Vertical Yoke Accessory Bracket. The bracket enables tilt rotation in the short axis of VX 8, VXP 8, VX 8.2 loudspeakers, ensuring precise audience coverage. With a remarkable safety factor of 10:1, it provides ...