Stands, Racks & Mounts

The Sennheiser GA3 is a 19" Rackmount kit for the Sennheiser G3 100/300/500 series. Specifications Weight: 2.2 lbs.

Senneheiser's MZQ800 is a rugged and adjustable mic clip designed for use with their MD42, MD46, as well as wired evolution handheld microphones (see below, all mics sold separately). It mounts your mic to a standard mic stand (sold separa ...

The GA1-XSW2 from Sennheiser is a rackmount kit that includes the rack ears, screws, and spacers needed to mount 1 or 2 EM-XSW receivers in a 19-inch rack.

Shock mount for the MZH goose-necks. Features Shockmount for MZH Goose-necks Significantly Reduces Transmitted Body Noise from Table or Lectern Specification Cut-Out Hole Required: 51mm Depth Under Flange: 50mm Overall Depth: 60mm Overall ...

Lock-on stand adapter, fits into slot on underside of MD421 microphone.

Sennheiser's MZQ 100 microphone clip for the e 606, e 609, e 614 and e 906.

Windscreen for EW handheld transmitters (optional) Reduce the distracting and harmful plosive sounds caused by breath pops and wind noise with this high quality windscreen. Fits all Evolution Wireless handheld transmitters. Color: dark cha ...

The Sennheiser MZQ600 is a microphone clamp including wing screw to 3/8" and 5/8" thread. Specifications Weight: 59g

Sennheiser MZQ 1 is a microphone clamp suitable for: SKM hand transmitters of the evolution wireless G3 series. Replacement swivel clip for all Evolution Wireless handheld transmitters. Threaded for standard 5/8" diameter microphone stand. ...

Foam windscreen for ME4 lavalier microphone, beige in color. Note: Shown in black.

Flexible stand adapter for the MD441 microphone.

The Sennheiser MZH 604 is an L-shaped drum clamp that fits their e604 and e904 microphones. A straight upright bracket allows an engineer to get really close to the drum head without reverting to a conventional microphone stand, saving spa ...

Ensure the best placement and most comfortable positioning of your Profile USB microphone with the Profile Boom Arm. The articulating arm features a 3-point self-locking mechanism with cable management and an adjustable clamp to keep your ...

Dual post tie clip for MKE platinum, MKE2, MKE102 AND MKE104. Premium grade clip for ME2 and ME4 (optional) Since we use essentially the same cable diameter on all of our lavaliers (except the new MKE Platinum), the MZQ222 and MZQ222-NI wi ...

Sennheiser's MZW 3-ew, a dark charcoal gray foam windscreen, is a replacement windscreen for the ME 3 headworn microphone found in the EW 152, EW 152 P, EW 352, EW 552 and EW 552 P systems.

Accessory kit for MKE2 consisting of MZQ222-NI, MZQ222, MZW2-A, MZW2-G, ZH100-ANT, ZH100-BEI and case. Includes (2) MZW2, Black and Beige (2) MZQ2, Black and Beigh (2) ZH102, Anthracite and Beige (1) MZW02 (1) Carrying Case

Gray foam windscreen for MKH20, MKH30, MKH40 and MKH50 microphones.

Foam windscreen for Sennheiser ME 66 Microphone. This open-cell foam windshield designed for use with the ME 66 microphone head protects effectively against wind and pop noise.

The Sennheiser MZH 3015 is a metal gooseneck for use with the ME 34, ME 35 and ME 36 microphone heads. The rugged, matte black gooseneck is fitted with a balanced, floating XLR-3 output, enabling the microphone to be powered from 12 – 48 ...

Foam windscreen for Sennheiser MKE400 shotgun microphone. Specifications 3 grams

Wall/ceiling mount with 5/8 in thread and 3/8 in adapter, for use when mounting one SI30 or SZI30.

The Sennheiser GA4 is a rack mount kit that's designed for use specifically with their Evolution Wireless D1EM stationary receiver. Specifications Weight: 2.2 lbs.

The Sennheiser MZH600 is a hairy windshield for MKE 600.

Pliable quick release stand adapter for MD431 II microphone.