Power Products & Batteries

Power supply, 110 VAC, 60 Hz input, 16.5 VAC, 1.6 A output, for LecNet audio components.

Battery charger for current model Lectrosonics rechargeable products and power supply for some LecNet components. 110/115 VAC input; 20 VAC output; 500 mA.

The Lectrosonics LB-50 (part no. 40106-1) is a rechargeable lithium-ion battery for Lectrosonic's SSM Micro Transmitter (3.7V 1000 mAh).

The battery charger designed for two Lectrosonics LB-50 batteries offers convenient charging capabilities. It operates through either a USB micro-B or USBC connection, providing flexibility in power sources. The package includes the charge ...

110 VAC adapter/power supply for most Lectrosonics wireless receivers. 12V DC output.

The ISO9VOLT battery eliminator allows Lectrosonics wireless transmitters with hinged battery doors designed for 9 volt batteries to be operated from external power sources. 10 to 18 volt DC is converted to regulated 9 volt DC to power the ...

The ISO9VOLT battery eliminator allows Lectrosonics wireless transmitters with hinged battery doors designed for 9 volt batteries to be operated from external power sources. 10 to 18 volt DC is converted to regulated 9 volt DC to power the ...

The ISO9VOLT battery eliminator allows Lectrosonics wireless transmitters with hinged battery doors designed for 9 volt batteries to be operated from external power sources. 10 to 18 volt DC is converted to regulated 9 volt DC to power the ...

Lectrosonics' Bias "T" is used to insert DC power into a coaxial cable to power a Lectrosonics remote antenna amplifier or filter/amplifier. It is positioned at the receiving end of the coaxial cable to pass DC power from an external sourc ...

Power Supply for R400 Receiver; 90-240 VAC, 50/60 Hz input; 12 VDC (regulated), 400 mA max. output.

Battery adapter for SR receivers. Accepts L and M type rechargeable batteries. Mounts above the SR receiver. See below for bottom mounting SRBATTSLEDBOTTOM. Has spare mounting screws in dummy holes in adapter.

PS70 A/C power supply with 60320 universal socket on housing, 100-240 VAC, 50/60 Hz, 1.6 A (max) input; 13.8 VDC, 2.8A, 40 W (max) output.

The Lectrosonics SMBATELIM is a battery eliminator for all Lectrosonics SM Series transmitters. Works with single or dual battery SM units. Lectrosonics SMBATELIM Battery Eliminator Features: Allows external powering of all SM Series trans ...

Lectrosonics presents the RPS4, providing a highly-reliable DC power source intended for low-voltage equipment including wireless microphone receivers, IFB transmitters audio signal processing gear and the like. It provides 2 internal powe ...

6 ft. long power cord, coaxial to stripped and tinned leads. Coaxial plug: ID-.080"; OD-.218"; Depth- .5".

Power supply for DNTBOB88 (15v 1.6A)

General purpose battery adaptor. Can be used with battery eliminators and receivers with LZR style connectors. LZR style cable (#PSLZRDUAL) included. Optional spring loaded clip is available. BATTERY NOT INCLUDED.

Battery charger with 4 pin XLR connector for use with Quad Pack UHF multicouplers; 120 VAC input; 18 VDC, 1A output.

Power Supply for the Long Ranger 4; IEC 60320 C14 inlet (standard 3-pin socket) coaxial outlet plug. 90-240 VAC, 50/60 Hz input; 15 VDC regulated, 2.0 A max. output, 18 W. Specify AC Power cord for country of use. Will not work for older L ...

Power supply, 220 VAC, 50 Hz input, 16.5 VAC 1.5A output, for LecNet audio components. Not for use with LecNet2™ components. For countries with 220 VAC, 50 Hz power.

LZR style plug to LZR style plug. 6ft. long.

12" Right Angle LZR to Right Angle LZR Power Cable

18" Right Angle LZR to Right Angle LZR Power Cable

The CHS12LB50A is a versatile charging station designed to accommodate up to 12 LB-50 lithium-ion batteries simultaneously. Engineered for efficiency and convenience, this charging station offers a centralized solution for powering multipl ...