Product Overview
The 44M06-DANTE is a formidable 4-channel Touring amplifier designed for uncompromising audio performance. With a power-packed configuration of four channels, each capable of delivering 6,000 Watts RMS, this amplifier from the 44M Series by Linea Research stands as a pinnacle in power and precision. Boasting advanced digital signal processing (DSP) capabilities, it ensures optimal control and customization of audio inputs and outputs. The amplifier's innovative design incorporates a high-performance Class D topology, delivering low distortion and high efficiency. Whether operating at 2, 4, or 8-Ohm nominal loads, or even in bridged configurations, the 44M06-DANTE ensures a consistent and powerful audio experience. Additionally, its comprehensive protection systems, including VX limiters and hardman crossover filters, contribute to the amplifier's reliability and longevity, making it an indispensable tool for demanding audio applications. The 44M06-DANTE comes with Dante AES67 digital network audio.
Linea Research 44M06-DANTE Features:
- Four channels of sonically pure Class D amplification
- Unique, precise, 96kHz digital signal processing
- Over-designed switch mode power supply
- 85V to 240V Auto-sensing PSU
- 6,000 watts RMS total output
- Full front panel user interface
- Ethernet network for system operation and monitoring
- Analogue, AES3
- Powerful grouping & multi-layer EQ
- Accepts 48kHz and 96kHz FIR files via System Engineer (certain models)
- Fully designed and engineered in house by Linea Research
- Manufactured in the UK
Linea Research 44M06-DANTE Specifications:
- General Specifications:
- Number of Channels: 4
- Total Power Output: 6,000 Watts RMS
- Audio Inputs: 4x Analog, 2x AES3, 4x Dante™/AES67 (factory fitted option)
- Digital Signal Processing: High-performance DSP processing on all inputs and outputs
- Control and Monitoring: Ethernet network, Volt-free relay, and contact closure port
- Power-Save Modes: Standby, Deep ECO sleep, System sleep, and wakeup options
- Power Output:
- RMS Output Power (per channel):
- Crest Factor of 4 (12dB), 2-Ohm nominal load: 1,500W
- Crest Factor of 2.8 (9dB), 4-Ohm nominal load: 1,500W
- Crest Factor of 2 (6dB), 8-Ohm nominal load: 1,500W
- Bridged, per channel pair, 4-Ohm nominal load: 3,000W
- 100V line (CV) operation, Crest Factor 4 (12dB): 1,500W
- 70V line operation, Crest Factor 4 (12dB): 1,500W
- 25V line operation, Crest Factor 4 (12dB): 685W
- Audio Performance:
- Amplifier Topology: Linea Research high-performance Class D
- Dynamic Range: Analog input (>113dBA typical), AES/Dante™ input (>114dBA typical)
- Gain: 32dB
- Frequency Response (4 Ohm load): 30kHz, -2.5dB points
- Total Harmonic Distortion (THD):
- Inter-Channel Crosstalk: Better than -85dBr at 1kHz and -75dBr at 10kHz
- Maximum Analog Input Level: +20dBu
- Digital Signal Processing:
- Resolution: 40 bit, Linea Research proprietary algorithms
- Sample Rate: 96kHz throughout
- Drive Module Input Processing: Input signal routing, delay, gain, HPF, phase, mute, EQ
- Drive Module Output Processing: Source, delay, gain, phase, mute, crossover filters, limiters, EQ
- Preset Management: 10 snapshots, 50 presets for loudspeaker settings
- Power Supply:
- Topology (Main Power Supply): Linea Research high-performance Series Resonant
- Topology (Auxiliary and Standby Supplies): Low quiescent Eco-Flyback
- Internally Stored Energy: >600 Joules
- Nominal Mains Input Voltage Range: 85V to 240V
- Mains Input Frequency Range: 47Hz to 63Hz
- Protection Systems:
- System Protection: Speaker protection, clipping prevention, temperature protection, DC offset protection, excessive HF energy limiter, VX audio output limiters
- Power Distribution Protection: Vx Limit (Multi-band peak limiter), Vx Max (Multi-band overshoot limiter), X-Max (Driver excursion limiter), T-Max (Driver thermal limiter)
- Monitoring and Measurement:
- Monitoring: Device statistics, counters, supply current, supply voltage, thermal capacity, driver current, driver impedance, protection limiting for each output
- Notifications: Provided through network or Volt-free changeover relay contacts on the rear panel
- Physical Specifications:
- Cooling: Dual vari-speed fans, front to back airflow, washable, toolless change filter mediaInputs and Outputs: Neutrik™ XLR, Speakon™ NL4 connectors, Powercon™, Shielded RJ45, Phoenix™ pluggable terminal block
- Front Panel: Graphical, high-contrast, daylight visible display with encoders and push buttons
- Enclosure: Standard 19” 2U (88mm), 14" (357mm) deep with handles and optional rear support
- Net Weight: 27.5 lbs. (12.5kg)
