Blaze Audio PowerZone Connect 2004 Pro 10 input 2000W max 4-channel networkable matrix smart amplifier with onboard mixing, DSP, Wi-Fi, and control

With system power ranging from 1000 to 3000 watts, the PowerZone™ Connect 2U series full-matrix DSP-enabled Class-D amplifiers deliver superior audio quality and highly versatile system configuration to your install projects. Designed to power both conventional low-impedance (2Ω to 16Ω) loudspeakers and constant voltage (70V/100V) transformer-coupled loudspeakers, they feature proportional distribution in both Lo-Z and Hi-Z modes. The PowerZone™ Control web app is built into all PowerZone™ Connect amplifiers for easy system setup. Control and customize even the most challenging audio/voice systems with features like multi-zone setup, input mixing, priority and ducking, restriction, input and output EQ, S/PDIF output routing, filters, delay, and more from your smart device. PowerZone™ Connect 2U amplifiers (2004/3004) are optionally compatible with Audinate Dante™ AoIP networks and installations, making them an ideal choice for new or retrofit projects. With their full rack form factor, hybrid power distribution in both Lo-Z and Hi-Z and powered by Pascal UMAC™ Class-D technology, these amplifiers are a powerful addition to any audio system. PowerZone™ Connect 2U amplifiers are also ErP and Energy Star-compliant UL-listed audio equipment, ensuring that they meet the highest standards of quality and reliability. With 2000 watts of pure Class-D power, full rack form factor, hybrid power distribution in both Lo-Z and Hi-Z and Pascal UMAC™ technology, the PowerZone Connect 2004 is a powerful addition to any audio system.

Blaze Audio PowerZone Connect 2004 Applications:

• Shopping malls
• Large scale distribution
• Auditoriums
• Hotels & Conferences
• Theaters
• Foreground music
• Casinos

Blaze Audio PowerZone Connect 2004 Includes:

• Amplifier unit
• Output connector x 1 or 2
• Rack mount ears (fitted) x 2
• Adhesive rubber feet x 4
• Mains power cable
• Document pack
• Input connector x 2
• GPIO socket connector

Blaze Audio PowerZone Connect 2004 Features:

• Full rack form factor
• Full-matrix DSP configuration via PowerZone™ Control web app (built-in)
• Hybrid power distribution in both Lo-Z and Hi-Z
• Powered by Pascal UMAC™ Class-D technology
• UREC™ universal power supply with PFC
• Flexible power sharing across output channels
• Audinate Dante® AoIP compatibility (optional)
• S/PDIF input/output
• Configurable GPIO
• ErP and Energy Star compliant
• UL listed audio equipment
• 5 Year warranty

Blaze Audio PowerZone Connect 2004 Specifications:

• Channels: 4 x lo-Z / 2 x Hi-Z
• Output Power @ 2Ω 4 x 500 W (SE)
• Output Power @ 4Ω: 4 x 500 W (SE) 2 x 1000 W (BTL)
• Output Power @ 8Ω: 4 x 250 W (SE) 2 x 1000 W (BTL)
• Output Power @ 70V: 2 x 1000 W (BTL)
• Output Power @ 100V: 2 x 1000 W (BTL)
• Power Consumption: 700 W
• Dimensions: 88 x 440 x 332 mm (3.5 x 17.3 x 13.1 in)
• Weight: 7.4 kg
• Output Voltage: 65 Vp / 130 Vpp (SE unloaded) 130, Vp / 260 Vpp (BTL unloaded)
• Total System Power: 2000 W
• Output Circuitry: UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion
• Signal To Noise-Ratio: > 106dB (A-weighted, 20Hz-20kHz, 8Ω load)
• THD+N (typical): < 0.05% (20Hz-20kHz, 8Ω load, 3dB below rated power)
• Frequency Response: 20Hz-20kHz (+0/-0.25dB (8Ω load, 3dB below rated power)
• Protection Circuits: Short circuit -, DC -, Undervoltage -, Temperature - and Overload protection
• Power Supply: UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
• Operating temperature: 0-40°C
• Operating Voltage/ Frequency.: Universal Mains, 100V-240V, 50Hz-60Hz
• Standby Consumption: < 0.5W
• Options: Audinate Dante® AoIP compatibility (PowerZone™ Connect 2004D/3004D only)
• Power Ratings: Output power measured @ 1% THD at 120VAC 60Hz and 230VAC 50Hz
• *SE – conventional, single ended output mode
• **BTL – bridge-tied load output mode