Product Overview
Mounting hardware is NOT included and must be purchased separately.
Offering unparalleled flexibility and versatility in a compact design, PowerZone amplifiers are configurable to drive Lo or Hi-Z loads per channel to fit specific speaker requirements. Power-sharing technology automatically shares the total available power across channel pairs, ensuring versatile power output for each installation. Rear Panel mounted DIP switches allow you to configure on-site with GPIO connectors for external controllers. PowerZone amps feature ultra-reliable Pascal UMAC™ Class-D technology, offering class-leading energy efficiency and long-term low cost of ownership. And they carry a 5-year warranty, so you can trust their reliability and performance. With 500 watts of pure Class-D power, an ultra-compact form factor, and optional rack ears. extension plates and full rack supports, PowerZone 504 installation is a breeze, and it fits in places where other products can't to deliver all the power you need.
Blaze Audio PowerZone 504 Applications:
- Bars and Cafes
- Restaurants
- Retail stores
- Fitness Centres
- Hotels and Education Sites
- Corporate
- House of Worship
Blaze Audio PowerZone 504 Includes:
- Amplifier unit
- Output connector x 1 or 2
- Mains power cable
- Adhesive rubber feet x 4
- Input connector 1 x 2
- Document pack
- GPIO socket connector
Blaze Audio PowerZone 504 Features:
- All channels deliver high & low impedance loads – meaning one amplifier can replace two, and saves you costs and installation time.
- Total power is automatically shared across the output channels – use one PowerZone™ amp to utilize the power where you need it (*modelspecific feature).
- Ultra-compact form factor – means the ½ rack PowerZone™ are so small and neat they can be installed in spaces where other brands cannot.
- Consolidate products and brands – save the hassle of sourcing multiple amplifiers when PowerZone™ can be used on many different install sites.
- Easy to configure DIP Switches - allow you to set up on-site as you need and have a front panel control lock to stop unwanted changes to your setup.
- GPIO interface – enables adding a standard remote control (potentiometer) to the system.
- Class-leading energy efficiency – means day-to-day energy saving and long-term low cost of ownership.
- Pascal’s UMAC™ Class-D amplifier technology – with market-proven, ultra-reliable U-PRO amp modules
- PowerZone™ quality and reliability are backed up with a 5-year warranty.
Blaze Audio PowerZone 504 Specifications:
- Channels: 2 x lo-Z / 2 x Hi-Z
- Output Power @ 4Ω: 2 x 125 W
- Output Power @ 8Ω: 2 x 125 W
- Output Power @ 70V: 2 x 125 W
- Output Power @ 100V: 2 x 125 W
- Powersharing (up to) across all channels: 1 x 250 W
- Power Consumption: 75 W
- Dimensions: 44.5 x 220 x 262 mm (1.75 x 8.66 x 10.31 in)
- Weight: 1.9 kg (4.2 lbs)
- Total System Power: 250W
- Output Circuitry: UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion
- Output Voltage: 70 Vp / 140 Vpp (unloaded) / Bridged 140 Vp / 280 Vpp (unloaded)
- Signal To Noise-Ratio: > 100 dB (A-weighted, 20 Hz - 20 kHz, 8 Ω load)
- THD+N (typical): < 0.05 % (20 Hz - 20 kHz, 8 Ω load, 3 dB below rated power)
- Frequency Response: 20 Hz - 20 kHz (+0/-0.25 dB (8 Ω load, 3 dB below rated power)
- Protection Circuits: Short circuit protection, DC protection, under voltage protection, temperature protection, overload protection
- Power Supply: UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and integral standby converter
- Operating Voltage/ Frequency.: Universal Mains, 100-240V, 50-60Hz
- Standby Consumption: < 0.5 W (Energy Star & ErP 1275/2008/EC compliant)
- Power Ratings: Output power measured @ 1% THD at 120VAC 60Hz and 230VAC 50Hz
