Product Overview
Providing listen-only monitoring capability for two sources, the Model 362A Dante intercom beltpack can be used for a wide range of applications, including TV and radio events, streaming broadcasts, journalism, post-production, and more. The 362A's compact rugged design makes it at home in the studio or in the field and gives you what you need without getting in your way.
A PoE (Power over Ethernet) connection and headphones are all you need to create a quick simple IFB (broadcast talent cue) or audio monitoring location. The audio quality is excellent, supporting rates up to 24-bit 96kHz. With Dante transmission and high-quality digital-to-analog converters, you can be sure the quality will hold up from end to end no matter how its output.
Studio Technologies MODEL-362A Applications:
- Broadcast sports
- Live entertainment
- News gathering
- Streaming broadcast
Studio Technologies MODEL-362A Features:
- Dante audio-over-Ethernet technology
- Configurable audio channel routing
- Dual level controls
- Excellent audio quality
- 1/4-inch and 3.5 mm output jacks
- Power-over-Ethernet (PoE) powered
Studio Technologies MODEL-362A Specifications:
- Power Source:
- Power-over-Ethernet (PoE): class 1 (very low power, ≤3.84 watts) per IEEE® 802.3af
- Network Audio Technology:
- Type: Dante audio-over-Ethernet
- AES67-2018 Support: yes, selectable on/off
- Dante Domain Manager (DDM) Support: yes
- Bit Depth: up to 24
- Sample Rates: 44.1, 48, 88.2 and 96 kHz including some pull-up/down values
- Dante Receiver (Input) Channels: 2
- Dante Audio Flows: 2, receiver
- Receiver (Input) Nominal Level: –20 dBFS
- Network Interface:
- Type: 100BASE-TX, Fast Ethernet per IEEE 802.3u (10BASE-T and 1000BASE-T (GigE) not supported)
- Power-over-Ethernet (PoE): Per IEEE 802.3af
- Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s not supported)
- Headphone Output:
- Type: Dual-channel
- Compatibility: intended for connection to mono or stereo headsets or earpieces with nominal impedance of 50 ohms or greater
- Maximum Output Voltage: 3.8 Vrms, 1 kHz, with 150 ohms load
- Frequency Response: 20 Hz to 20 kHz, +0/–2 dB
- Distortion (THD+N):
- Dynamic Range: >100 dB
- Connectors:
- Headphone Output: ¼-inch 3-conductor jack and 3.5 mm 3-conductor jack
- Ethernet: Neutrik etherCON RJ45
- USB: type A receptacle (located inside Model 362A's enclosure and used only for updating application firmware)
- Configuration: uses Studio Technologies' STcontroller personal computer application
- Environmental:
- Operating Temperature: 0 to 50 degrees C (32 to 122 degrees F)
- Storage Temperature: –40 to 70 degrees C (–40 to 158 degrees F)
- Humidity: 0 to 95%, non-condensing
- Altitude: not characterized
- Dimensions (Overall):
- 3.1 inches wide (7.9 cm)
- 1.5 inches high (3.8 cm) without belt clip, 1.8 inches (4.6 cm) with belt clip
- 4.0 inches deep (10.2 cm)
- Weight: 0.5 pounds (0.2 kg)
- Deployment: intended for portable applications; contains integral belt clip