Audio Press Box APB-D200-R-D Drive unit, 2Ch Dante/LINE In, 4 buff. Out for 12 APB exp.

The AudioPressBox APB-D200 R-D features Analog and Dante inputs with high-quality digital-to-analog converters, supporting a range of sample rates and bit depths. It also is usable as a hardware master clock for a Dante network. The Dante Controller software application is used to automatically discover and configure APB-Dante devices connected to the Dante network. Device names, channel labels, signal routing, and other parameters can all be configured via the network using Dante Controller. AudioPressBox Dante units use Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.

Note: If using a PoE injector, it must be IEEE 802.3af compliant. The use of a non-compliant PoE injector can terminally damage the device and may void the warranty.

Available Software Options:

Dante Controller

Dante Via

Dante Virtual Soundcard

Drive unit for : APB-008 SB-EX, APB-008 IW-EX, APB-008 OW-EX, APB-008 FB-EX, APB-024 R-EX, APB-P008 OW-EX, APB-P008 IW-EX

Audio Press Box APB-D200-R-D Features:

• Professional active 19” rack AudioPressBox Drive unit
• DANTE interface - 2 channels
• 2 Channels (balanced LINE Input / DANTE)
• Switchable High-Pass filter for for each Input channel
• Switchable Compressor and Limiter for for each Input channel
• 4 separately buffered Outputs (2 for each channel) that can drive 6x APB-008 or 2x APB-024 Output expanders.
• Maximum drive capacity 96 Line or Mic Outputs.

Audio Press Box APB-D200-R-D Specifications:

• Type:
  • 2 Line/DANTE input channels
  • 4 Drive OUT for 12xAPB 8-Output expanders or 4xAPB 24-Output expander
• Note: Total capacity: 96 Line/Mic outputs (12x APB-008 xx-EX or 4x APB-024 R-EX)
• Groups: 2
• Inputs: 2 LINE / 2 DANTE
• Input connectors: Balanced, XLR, RJ45 - DANTE
• Max. input leve: Line: +32/+2dBu
• Input Impedance: >5kOhm
• Outputs: 4 separately buffered, balanced outputs for AudioPressBox expanders
• Output connectors: Balanced, XLR
• Nominal Output Level: +6 dBu
• Maximum Output Level: +20dBu with 48 Outputs in use +16dBu (600kOhm)
• Output impedance:
• Transformer isolated outputs: Yes (each EXPANDER output is Independent Transformer Isolated)
• SNR:
• Frequency Response: 30/160Hz (filter) to 60kHz/-1dB
• Controls: Input gain, Compressor and Limiter, High Pass Filter, Power
• Indicators: Input clip, Output level, Gain reduction, Power
• Power Supply: 24V DC, 1A external adaptor
• Dimensions (WxHxD): 480x120x44
• Weight: 2090g