Kramer VW-4 4 Output Video Wall Driver

The VW-4 is a video wall driver engineered to facilitate the swift and straightforward configuration and management of video walls. A single VW-4 device has the capacity to establish diverse wall configurations, accommodating up to four displays. This configuration versatility includes options such as a 2x2, 4x1, 1x4, 2x1, and 3x1 video wall. The potential expands when additional VW-4 devices are connected, enabling the creation of video walls of variable sizes and configurations, with a maximum capacity of 64 displays. Configuration can be executed through the VW-4 app, which interfaces with the devices via Ethernet or RS-232, or it can be expedited using the local dip switches for basic setup arrangements.

Kramer VW-4 Features:

• Quick front panel setup
• PC App for comprehensive setup
• Up to 64 displays with additional devices
• HDCP and EDID support
• Constant output sync
• CEC auto display control

Kramer VW-4 Specifications:

• 1 HDMI: On a female HDMI connector
• 4 HDMI: On female HDMI connectors
• 1 HDMI Loop: On a female HDMI connector
• 1 Ethernet: On an R–J45 connector
• 1 RS-232: On a 3–pin terminal block connector
• USB: On a USB type–A connector
• Max Input Resolution: 4K@60Hz (4:4:4)
• Max Input Data Rate: 18Gps
• Output Resolution: 1080p
• Content Protection on Input and Loop Output: HDCP 2.2
• Content Protection on Main Outputs: HDCP 1.4
• Indicators: I/O detection and power LEDs
• Controls: DIP–switches for basic setup, computer app for comprehensive setup via Ethernet or RS–232, firmware upgrade via USB
• Included: Power adapter, bracket set, rubber feet
• Source: 5 V DC
• Consumption: 2.9 A
• Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non–condensing
• Storage Temperature: –20 to +70°C (–4 to + 158 °F), 10% to 90%, non–condensing
• Humidity: 10% to 90%, non–condensing
• PRODUCT DIMENSIONS: 19.00 cm x 19.50 cm x 2.70 cm (7.48" x 7.68" x 1.06" ) W, D, H
• PRODUCT WEIGHT: 0.9 kg (1.9 lbs) approx.