Klover MiK 26 Dual Dual MiK 26" Parabolic Collectors

The Klover MiK 26" parabolic collector extends the pickup range of your microphone to over 500 feet. And the KM 26 Dual package was designed to save you money and shipping cost. A microphone is not sold with the collectors. An electronic pickup or microphone must be installed to capture audio.

the industry-standard MiK 26 is the venerable model seen every Sunday on football fields across America so you know it's broadcast ready. Safety is paramount at Klover so the MiK 26 is built from carbon fiber that cushes upon impact leaving no sharp or brittle pieces. Plus, all protruding studs have been removed from the front of the dish.

The Klover Mik 26 TE is designed from a highly reflective ballistics-grade plastic resulting in a full-range audio signal. Vibration insulation bushings have been added to all attachments and handles to eliminate operator transferred noise.

Klover MiK 26 Dual Applications:

Broadcast

Sound reinforcement

Law enforcement

Klover MiK 26 Dual Includes:

• Qty (2) Klover KM-26-DUAL Parabolic Collectors
• Qty (2) Neck Strap

Klover MiK 26 Dual Features:

• 2 MiK 26 Parabolic Collectors
• 26" Dish
• Captures Audio up to 600' Away
• Mic Yoke with Lavalier Mic Adapter
• Left and Right Handles
• Rear Handle Crossbar

Klover MiK 26 Dual Specifications:

• Range: 500 to 600 feet in ideal conditions
• Amplification: Approximately 48 X
• Dish Outside Diameter: 26 inches
• Collector Diameter: 24 inches
• Weight: Approximately 7.5 pounds
• Collector Dish Thickness: 1/4 inch
• Frequency: 40 Hz to 20 kHz (dependent on microphone used)
• Focus Point: 2-1/4 inches behind the inner face of mic mounting hub or 4 inches behind the front flange of the dish
• Pickup Pattern: Approximately conical (15 degrees off center)
• (See “Test Results” tab below)
• Microphone: Omnidirectional mic (lapel mics up to 5/16 inch in diameter or cylindrical/pencil mics 3/4 to 7/8 inch in diameter)
• Mounting Options: intended to be handheld
• Accessory Mounting: the optional monopod mount allows the unit to be mounted on a tripod or monopod