DPA 4066-OC-A-C10-LH 4066 Omni Headset Mic, Brown, TA4F, standard size

The go-to microphone for Broadway production and broadcast, the DPA 4066 delivers natural transparent audio quality with ample headroom to avoid distortion while capturing a wide dynamic range. The 4066-OC-A-C10-LH is a standard size 4066 omnidirectional headset mic in brown with a TA4F connector for use with Shure bodypacks.

DPA's reputation for crafting rugged microphones is legendary, and the 4066 is no exception. Covered by a 2-year warranty and carrying an IP58 dust and water ingress rating, the 4066 was built for performance, shying away from nothing to deliver precisely what you want to hear.

If you use multiple wireless systems from separate manufacturers, DPA's modular adapter system allows you to purchase (separately) the required adapters so you can quickly swap them out for ultimate flexibility.

DPA 4066-OC-A-C10-LH Features:

• Resistant to humidity
• Double-vent protection system
• Available in three colors and three sizes
• Modular adapter system fits most professional wireless systems

DPA 4066-OC-A-C10-LH Specifications:

• Directional pattern: Omnidirectional
• Principle of operation: Pressure
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective frequency range ±2 dB:
  • Soft boost grid: 40 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz
  • High boost grid: 40 Hz - 20 kHz, 10 dB boost at 12 kHz
• Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
• Distortion, THD < 1% - Legacy: 120 dB SPL RMS, 123 dB SPL peak
• Distortion, THD < 1%: 134 dB SPL RMS, 137 dB SPL peak
• Dynamic range - Legacy: Typ. 97 dB
• Dynamic range: Typ. 111 dB
• Max. SPL, THD 10%: 144 dB SPL peak
• Rated output impedance: 30 - 40 Ω
• Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
• Power supply (for full performance): For wireless systems: Min. 5 V - max. 10 V through DPA adapter, With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
• Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
• Connector: MicroDot, TA4F Mini-XLR, 3-pin LEMO, Mini-Jack
• Color: brown
• Weight: 14 g (0.5 oz) incl. Cable and MicroDot connector
• Microphone diameter: 5.4 mm (0.21 in)
• Cable length: 1.2 m (3.9 ft)
• Cable diameter: 1.6 mm (0.06 in)
• Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%