Hollyland LARK 150 Solo 1-Person Wireless Microphone System

Hollyland HL-LARK-150-SOLO Lark 150 Solo 1-Person Wireless Microphone System

A compact, one-person clip-on wireless mic system that is perfect for vlogging, YouTube presentations, live streaming, and other digital content creation.

The Lark 150 Solo provides stable wireless audio transmission up to 100 meters with less than 5ms latency. The ultra-compact transmitter (37x37x17.5mm, 21g) clips to any collar easily and has a built-in, highly sensitive omnidirectional microphone with an anti-vibration chamber to cancel noise for the best possible recording quality. An omnidirectional lavalier microphone is also included which can be connected to the transmitter’s 3.5mm input jack for more recording options.

Both the transmitter and receiver have mute buttons for control of your audio. The included carry case is also a charging station and pairing box.

Hollyland LARK 150 Includes:

• (1) Charging Case
• (1) Transmitter
• (1) Receiver
• (1) Lavalier Microphone
• (1) Furry Windshield
• (1) 3.5mm TRS Patch Cable
• (1) 3.5mm TRS to TRRS Patch Cable
• (1) USB Type-A to Type-C Cable
• (1) User Guide
• (1) Storage Bag

Hollyland LARK 150 Specifications:

• Interfaces:
  • Transmitter/Mic: 3.5mm audio input, charging/upgrading contacts
  • Receiver: 3.5mm TRS output jack, 3.5mm headset jack, charging/upgrading contacts
  • Charging Case: USB Type-C jack
• Built-in Mic: Omnidirectional polar pattern, frequency response 20Hz – 20kHz
• Lavalier Mic: Omnidirectional polar pattern, frequency response 20Hz – 20kHz
• Reference Audio Input Level: -65dBV
• Maximum SPL: 100dB (1kHz @ 1m)
• Frequency Bandwidth: 2.4GHz AFH
• Dynamic Range: 100dBA
• Audio Output Level Change Rate: 21-state: 45dB
• Transmission Latency:
• Battery Mode:
  • Transmitter: 200mAh (0.76Wh)
  • Receiver: 530mAh (1.96Wh)
  • Charging Case: 3500mAh (12.7Wh)
• Battery Life:
  • Transmitter: Approx. 4 hours
  • Receiver: Approx. 7.5 hours
  • Charging Case: Can charge 2 TX and 1 RX at same time to full charge about 2.5 times
• Charging Time:
  • Transmitter: Approx. 45 minutes
  • Receiver: Approx. 65 minutes
  • Charging Case: Approx. 2.5 hours
• Firmware Upgrade Method: PC
• Dimensions/Weight:
  • Transmitter: 37mm x 37mm x 17.5mm, 20.5g
  • Receiver: 67mm x 41mm x 20.5mm, 51g
  • Charging Case: 121mm x 61mm x 43.5mm, 227.5g