Product Overview
MULTIDYNE 3 CAMERA FIBER BACK PACKAGE PLUS FIBER BASE STATION - NEUTRIK OPTICALCON
The FS-900 is a camera mounted Fiber optic system designed for JVC's GY-HM890 and GY-HC900 camcorders. Built by MultiDyne Video & Fiber-Optic Systems for JVC, the system supports 3G-SDI 1080p/60 camera feeds and returns, and uses the camera's built-in streaming engine for video-over-IP functionality.
The camera module connects directly to the back of the camcorder via 68-pin interface—no external cables needed, ready for full studio functionality. It transports multiple bi-directional 3G-SDI signals as well as control, audio, sync, and intercom between the camera and the FS-900 Base Station.
Up to three cameras are supported by the Base Station, and its power supplies provide up to 150 watts for each camera, along with prompters and talent monitors. Its three-in-one configuration provides a more cost efficient solution.
JVC FS-900BS1NCAM3 Features:
- Cost-efficient three-camera studio configuration with single base station.
- Supports 1080 50/60p 3G-SDI camera feed and returns.
- Camera adapter design allows to use VF-HP790 or generic SDI monitors as studio VF.
- HDMI / SDI feeds for high-quality HD teleprompters.
- Gigabit Ethernet for Video-over-IP and web-based RCU.
- Dual redundant power supplies.
JVC FS-900BS1NCAM3 Specifications:
- Digital Video, Camera to Base
- Number of Channels: 1 Per Camera
- Interface: SMPTE ST259, ST292, ST424
- Data Rate: 270Mbps, 1.5Gbps, 3Gbps
- Input/Output Level: 800mVp-p
- Input/Output Impedance: 75 Ohms
- Number of Outputs at Base: 2 Per Camera
- Digital Video, Base to Camera
- Number of Channels: 3 Per Camera
- Interface: SMPTE ST259, ST292, ST424, HDMI**
- Data Rate: 270Mbps, 1.5Gbps, 3Gbps
- Input/Output Level: 800mVp-p
- Input/Output Impedance: 75 Ohms
- Connectors: BNC, HDMI***
- Video, Genlock
- Number of Inputs: 1 + Loop Output
- Type: Analog Black Burst, Tri-Level
- Impedance: 75 Ohms
- Connector, Camera Unit: Internal
- Connector, Base Unit: BNC (x2)
- Audio, Camera to Base
- Type: Embedded in Camera’s SDI video
- Number of Channels: Max supported by camera
- Audio, Base to Camera
- Number of Channels: 2
- Type: Balanced Analog Line-Level, mono
- Level: +4dBu nominal, +24dBu max.
- Connector, Camera Unit: DB9
- Connector, Base Unit: DB25
- Intercom
- Number of Channels: 2
- Interface: 2-Wire or 4-Wire
- Compatibility: RTS, Clear-Com
- Connector, Camera Unit: XLR-5
- Headset MIC Type: Dynamic
- Headset MIC Impedance: 200 Ohms nominal
- Connector, Base Unit: DB25
- RCP Camera Control (Remote)
- Number of Channels: 1 Per Camera
- Connector, Camera Unit: Internal
- Connector, Base Unit: 6 pin Mini-DIN (x3)
- Ethernet
- Number of Channels: 1 Per Camera
- Data Rate: 10/100/1000 Base-T
- Connector, Camera Unit: RJ45 Cat5e
- Connector, Base Unit: RJ45 Cat5e (x3)
- Timecode
- Number, Base to Camera: 1 per Camera
- Number, Camera to Base: 1, from Camera # 1 only
- Inputs: Unbalanced, 15Vp-p max
- Outputs: Unbalanced, 3Vp-p:
- Connector, Camera Unit: Internal
- Connector, Base Unit: BNC
- Tally/GPIO
- Number, Base to Camera: 3 per Camera (Red, Green, Spare)
- Number, Camera to Base: 1 Per Camera
- Inputs: Short to GND or TTL Low to Activate
- Outputs: Relay Contact Closure (30V, 2A max)
- Connector, Camera Unit: DB15
- Connector, Base Unit: DB25
- Electro-Optical
- Operating Wavelengths: 1471-1611nm
- Tx Laser Output Power: 0dBm (Class 1 Laser)
- Receiver Sensitivity: -20dBm
- Fiber Compatibility: Single-mode
- Optical Connector Types: opticalCON DUO (FS-900CAM1N), SMPTE 304M (FS-900CAM1S)
- Mechanical/Environmental
- Dimensions (HxWxD):
- Camera Unit: 8.2” x 6.7” x 4.2”
- Base Unit: 3.5” x 19” x 16” (2RU)
- Environmental: 0 to 50°C, 0 to 95% RH, non-condensing.
- Power Input, Base: IEC320, Universal Input, 90-250VAC, 50-60Hz
- Power Input, Camera
- Remote Power: Hybrid Fiber Connector
- Local Power: Battery Mount ((Anton Bauer or (Optional) V-Mount))
