Product Overview
Long known for audio innovation, Sennheiser once again delivers with the IE 100 Pro in-ear monitors. Available in black, red, or clear, the 100 Pro employs a unique 10-mm single dynamic driver design to deliver powerful audio across an expanded frequency range. Plus, this wireless version is a two-in-one bundle that includes a standard cable for wired use and a Bluetooth module for wireless connection. The wireless module also has a built-in microphone and remote for call and music control.
The single diaphragm resonates more easily than multi-driver designs, eliminating distortions even at maximum levels. The harmonious operation of this design also removes dissonances and phase problems in the ear canal. In short, you hear the source as intended.
Musicians, audio engineers, and DJs who are used to long sessions will appreciate Sennheiser's dirve to create a more universal fit. Tested against hundreds of ear shapes, the redesigned drivers sit flat, secure, and carry no weight. This means no constant repositioning to get the sound and feel you want.
Sennheiser knows audio professionals need gear that responds day in and day out. The 100 Pro has a redesigned internal cable duct that can withstand the demands placed on it by constant use. And if the cables wear out it's not a problem because you can remove and replace them.
Stunning sound for stage or on the go, the IE 100 Pro.
Sennheiser IE100-PRO-W Includes:
- IE 100 PRO (BLACK, CLEAR or RED)
- Bluetooth connector
- Black cable for IE 100 PRO
- USB-A to USB-C cable
- Soft pouch
- Cleaning tool
- Foam and silicone ear adapters
- Quick guide
- Safety guide
- Compliance sheet
Sennheiser IE100-PRO-W Features:
- Dynamic full-range transducer for high-resolution,
- powerful monitoring sound
- Reduces acoustic stress factors through natural and
- distortion-free reproduction
- 2 in 1 bundle: Bluetooth® module for wireless connection
- to mobile devices, PCs or tablets, with a built-in
- microphone for calls or standard 3,5 mm jack-plug
- cable
- Excellent shielding through optimized earpiece shape
- and flexible silicone and foam attachments
Sennheiser IE100-PRO-W Specifications:
- Frequency response: 20 - 18,000 Hz
- Impedance: 20 Ω
- Sound pressure level (SPL): 115 dB (1 kHz / 1 Vrms)
- Total harmonic distortion (THD): < 0.1 % (1 kHz, 94 dB)
- Noise attenuation: < 26 dB
- Magnetized field strength: 1.63 mT
- Operating temperature: –5 °C to +50 °C (23 °F to 122 °F)
- Storage temperature: –20 °C to +70 °C (–4 °F to 158 °F)
- Relative humidity: < 95 %
- Bluetooth® Connector
- Wearing style Bluetooth® neckband cable
- Microphone principle MEMS
- Microphone frequency response: 100 - 8,000 Hz
- Microphone sensitivity: -42 dBV/Pa (ITU-T P.79)
- Microphone pick-up pattern (speech audio): omni-directional
- Power supply
- Built-in rechargeable lithiumpolymer battery
- 3.7 V ⎓, 100 mAh
- USB charging 5 V ⎓, 100 mA max.
- Operating time: 10 h (music playback via SBC) with rechargeable battery; 240 h in standby mode
- Charging time of rechargeable batteries: approx. 2.5 h
- Operating temperature: +5 °C to +40 °C ± 5 °C (41 °F to 104 °F ± 9 °F)
- Charging temperature: +10 °C to +40 °C ± 5 °C (50 °F to 104 °F ± 9 °F)
- Storage temperature: –20 °C to +70 °C (–4 °F to 158 °F)
- Relative humidity
- Operation: 10 - 80 %, non-condensing
- Storage: 10 - 90 %
- Magnetized field strength: 1.63 mT (with IE 100 PRO) 0.23 mT (without
- headphone)
- Weight approx.: 13 g
- Bluetooth®
- Version Bluetooth 5.0 compatible, class 1, BLE
- Transmission frequency 2,402 - 2,480 MHz
- Modulation: GFSK, π/4 DQPSK, 8DPSK
- Profiles: HSP, HFP, AVRCP, A2DP
- Output power: 10 mW (max)
- Codec: SBC, aptX®, aptX LL®, AAC
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
- marks by Sennheiser electronic GmbH & Co. KG is under