Product Overview
The AZA804 4-channel 800-watt networkable amplifier is engineered to provide power to the Atlas Atmosphere family of products. Configurable in channel pairs, the AZA804 can deliver up to 100W per channel into 70/100V lines or 4/8 ohm loads providing options for installers.
Out of the box the AZA804 is set to 4-channel, 70V mode for easy pairing with AtlasIED Atmosphere signal processors and there's no additional programming or network connectivity needed. Plus, a web interface provides additional monitoring, processing, and the ability to change output modes.
Applications
Restaurants
Presentation rooms
Classrooms
Conference rooms
Retail
Features
- 70V, 100V, 8Ω, or 4Ω functionality, configurable in channel pairs
- Up to 200W per channel (4 x 200W)
- Four (4) balanced inputs
- Web interface to change output modes and additional monitoring/processing
- Optional Accessory Card Slot for a Four-Channel Dante™ Receiver (DPA-DAC4)
Specifications
- System
- Type: 800-Watt 4-Channel Configurable Network Digital Commercial Power Amplifier
- Power Supply Type: Global Switch Mode
- Amp Topology: Class AB Hybrid-BASH
- Number of Fixed Inputs: 4
- Accessory Inputs: 4 (Optional Accessory Card Required)
- DSP Internal: Yes
- Network: Ethernet
- Optional Card Slot: Yes x 1
- Output Power
- 100V x 4 CH: 200W
- 70V x 4 CH (Factory Default): 200W
- 8Ω x 4 CH: 150W
- 4Ω x 4 CH: 100W
- 100V x 1 + 8Ω x 2CH: 200W / 150W
- 70V x 1 + 8Ω x 2CH: 200W / 150W
- 100V x 1 + 4Ω x 2 CH: 200W / 100W
- 70V x 1 + 4Ω x 2 CH: 200W / 100W
- Factory Default Settings (As Shipped)
- Amplifier Configuration: 4 CH 70V Mode
- Level Controls Assignment: Front Panel
- I/O Matrix: Input 1 Routed to Output 1, Input 2 to Output 2, Input 3 to Output 3, Input 4 to Output 4
- Level Position: DSP Set to 0dBU
- EQ & Filters: DSP High Pass Filers Set to -3dB 20Hz, EQ Filters Flat
- Limiter: 0dB (Max Power)
- GPIO Control Ports (Rear Panel): Remote Level, C1 Assigned to Output 1, C2 to Output 2, C3 to Output 3, C4 to Output 4
- Auto Power Down (APD): Disabled
- Inputs
- Input Quantity: 4 Balanced Inputs, Expandable to 8 via Dante Accessory Card
- Input Type: Balanced
- Input Impedance: 40kΩ
- Input Sensitivity: 750mV Balanced, 0dBu
- Maximum Input Level dBu & Vrms: 14dBu, 3.82V
- Input Connectors Type: 3.5mm Euro Block
- Accessory Slot: 4 Input Dante™ Digital Card (DPA-DAC4)
- Level Control
- GUI Control: PC (Requires Ethernet Cable), iPhone®, Android® Using a Standard Web Browser
- Status Indicators
- Power: Blue
- Standby (Remote Turn ON): Blinking Blue, Front Panel Only
- Output Signal: Green
- LED Bar Meter: GUI Only
- Output Limit / Protect: Red
- 4Ω / 8Ω: Yellow, CH 1/2 & CH 3/4
- 70V / 100V Operation: Yellow, CH 1/2 & CH 3/4
- Output Mute Status: Flashing Red
- DSP Elements
- IO Routing: Matrix Mixer
- Hi & Low Pass Filters: One Per Output, Adjustable Slopes and Frequencies
- EQ: 5 Parametric Filters Per Output
- Delay: 60mS Per Output
- Limiter: Each Output up to 12dB of Assignable Limiting
- DSP Frequency Type: 48k, 24bit
- Interface Control Ports
- USB: No
- Ethernet: GUI Access, RJ45 Rear Panel
- Wi-Fi: No
- Bluetooth: No
- GPIO Ports
- Location: Rear
- GPIO Ports: Qty 4, Remote Level & Mute Functions, Assignable, PHX Connector
- Connection: Euro Block PHX Type 3.5mm, 6 Pins, Ground, +10VDC, C1, C2, C3, C4
- Functions: Mute, Remote Level (Assignable)
- Output Terminals (Speaker)
- Output Connectors Type: Screw Terminal Barrier Strip with Cover
- Output Connectors Number of Terminals: 8, M4 Thread
- Output Connectors: Fixed
- Wire Size: 18-10 AWG When Using Yellow Spade Lug 0.250 Terminal, Qty 8 Included (Class 3 Wiring Required)
- Terminal Spacing: 0.300" (7.62mm)
- Current Rating: 25A per Terminal
- Cooling
- APD Standby, Active Idle: Convection Cooled
- In Use: Convection Cooled with Variable Speed Fan Assist
- Cooling Air Flow Direction: Rear to Front
- Electrical Specifications (General)
- Total Harmonic Distortion 1 kHz and 1dB Below Rated Power: Typical, 0.2%
- Frequency Response: 20Hz - 20kHz (DSP Filters Set to Flat)
- Signal to Noise Ratio: >100dB Below Rated Output (A-weighted)
- Damping Factor (20Hz to 400Hz): 100 (Measurement is Limited Due To DSP)
- Slew Rate: 40Vus
- Crosstalk: 73dB @ 1KHz, CH1-2 & CH 2-1, CH3-4 & CH4-3
- Protection: Hi / Low Input Voltage, Thermal, Short, Over Current
- Max Output Peak Voltage 100V Mode: 140V
- Max Output Peak 4Ω Mode: 7A
- AC Power Requirements
- Operating Voltage: 110V - 120V & 220V - 230V 50/60Hz, Auto Voltage Sense
- Mains Interface: IEC 15A Receptacle
- Power Cord (Included): 1.5m, IEC C13 to NEMA 5-15P Plug, 18AWG
- Minimum Power-Up Voltage: 90V
- Maximum Operating Voltage: 264V
- Recommended AC Mains Current Requirements: 5.3A (Speech & Background Music), 15A (Max Usage)
- Dimensions (HxWxD): 1.75" x 19" x 15.5"
- Weight: 13 lbs.