Product Overview
The 4-Series control systems feature an enhanced multicore CPU, offering substantial enhancements in speed and performance when juxtaposed with all Crestron 3-Series® control processors. This upgraded performance capacity empowers 4-Series control systems to effectively address the escalating demands inherent in sophisticated automated systems. Leveraging the heightened capabilities of the Crestron 4-Series platform, users can seamlessly manage a diverse array of technologies within a room while ensuring dynamic and secure control system operations.
Crestron CP4 Features:
- Equipped with upgraded multicore CPU
- Offers significant speed and performance increase compared to Crestron 3-Series control processors
- Capable of handling increasing demands of advanced automated systems
- Dynamic and secure control system platform
- Allows management of disparate technologies within a room
Crestron CP4 Specifications:
- Speed: 100/1000 Mbps
- Auto-switching, auto-negotiating, auto-discovery
- Full/half duplex
- Industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol)
- FIPS 140-2 compliant encryption
- IEEE 802.1xX, SNMP, BACnet™ and IP1
- Supports IPv4 or IPv6
- Active Directory® service authentication
- HTTPS web server, HTTPS web browser setup, and XiO Cloud® client
- Cresnet® Network: Master mode
- USB: Supports USB mass storage class devices via rear panel USB 2.0 host port, Supports computer console via front panel USB 2.0 device port
- RS-232/422/485: For 2-way device control and monitoring, COM port supports RS‑232 up to 115.2k baud with software handshaking, One port supports RS‑422 or RS‑485 with hardware handshaking
- IR/Serial: Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0–5 V) up to 115.2k baud
- SDRAM: 2 GB
- Flash: 8 GB
- Supports SD and SDHC cards up to 32 GB
- Supports USB mass storage devices up to 1 TB
- RELAY OUTPUT 1–8: (2) 8-pin 3.5 mm detachable terminal blocks
- I/O 1–8: (1) 9-pin 3.5 mm detachable terminal block
- IR - SERIAL OUTPUT 1–8: (2) 8-pin 3.5 mm detachable terminal blocks
- COM 1: (1) 5-pin 3.5 mm detachable terminal block
- COM 2–3: (2) 3-pin 3.5 mm detachable terminal blocks
- MEMORY: (1) SD memory card slot
- USB: (1) USB Type A connector, female
- LAN: (1) 8-pin RJ45 connector, female
- NET: (1) 4-pin 3.5 mm detachable terminal block
- 24VDC 2.0A: (1) 2.1 x 5.5 mm DC power connector
- G: (1) 6-32 screw
- COMPUTER (front): (1) USB Type B connector, female
- PWR: (1) Green LED
- NET: (1) Amber LED
- MSG: (1) Red LED
- HW-R: (1) Recessed push button for hardware reset
- SW-R: (1) Recessed push button for software reset
- LAN (rear): (1) Bicolor green/amber and (1) Amber LEDs
- Power Source Options: Power pack or Cresnet (connect only one)
- Power Pack (included): Input: 100–240 VAC, 50/60 Hz; Output: 2.5 A @ 24 VDC; Model: PW-2420RU
- Cresnet Power Usage: 15 W (0.625 A @ 24 VDC) when powered by a Cresnet power supply only
- Available Cresnet Power: 24 W (1 A @ 24 VDC) when powered by the included power pack only
- Power Consumption: 15 W (not including any connected Cresnet devices)
- Temperature: 41 to 113 °F (5 to 45 °C)
- Humidity: 10% to 90% RH (noncondensing)
- Heat Dissipation: 50 BTU/hr
- Chassis: Metal, aluminum, black finish
- Faceplate: Extruded metal, black finish, polycarbonate label overlay
- Mounting: Freestanding or 1 RU 19-in. rack-mountable (adhesive feet and rack ears included)
- Height: 1.70 in. (44 mm) without feet
- Width: 17.28 in. (439 mm); 19.00 in. (483 mm) with rack ears
- Depth: 6.56 in. (167 mm)
- Weight: 3.12 lb (1.42 kg)
