Product Overview
The NODE16-DIN stands as a DIN-rail mounted bridging solution, seamlessly integrating Ethernet to DMX functionality. Compatible with Artistic License's Art-Net or Streaming ACN (ANSI E1.31) protocols, it offers sixteen DMX512 outputs, each isolated from the Ethernet input. Connection to Ethernet is facilitated through an RJ45 connector, while DMX512 output connections utilize pluggable Phoenix terminal blocks. Versatile in power options, the NODE16-DIN supports Power over Ethernet (PoE – 802.3af) or a 24-48VDC power input. Configuration is user-friendly, featuring a backlit graphical LCD and an encoder wheel for intuitive setup.
Doug Fleenor Design NODE16-DIN Features:
- Supports Power over Ethernet (PoE – 802.3af) or a 24-48VDC power input.
- Backlit graphical LCD
- DIN-rail mounted
- 16 DMX512 outputs
Doug Fleenor Design NODE16-DIN Specifications:
- DMX PORT SPECIFICATIONS
- Port circuit: Protected EIA-485 receiver (LT1785)
- NOTE: This product uses slew-rate-limited output drivers. Slew-rate-limited drivers
- minimize EMI and reduce reflections.
- Output signal: 1.5 Volts (minimum) into 120 Ohm Termination
- Connectors: Four 12-position pluggable Phoenix terminal blocks
- Port protection: +60V continuous, +15KV transient
- Isolation: Optically isolated to 1,500 Volts from the input. The outputs are not isolated from each other.
- ETHERNET SPECIFICATIONS
- Input circuit: 802.3 Ethernet compliant input (LAN8720)
- Input signal: Art-Net or sACN (ANSI E1.31) Ethernet protocols
- Input connector: Ethernet RJ-45 with 802.3af PoE (Power over Ethernet) capabilities.
- MDIX: Auto-negotiated
- MAIN SPECIFICATIONS
- Power input: 802.3af PoE (Power over Ethernet) or Auxiliary 24-48VDC 500mA via a 2-position pluggable Phoenix terminal block
- Indicators: Red POWER indicator
- 16 Green MIMIC 1 indicators mimic the level of the first channel on each output (useful in troubleshooting)
- 16 Green SIGNAL indicators illuminate when DMX output signal is present on each port
- Configuration: Backlit graphical LCD and an encoder wheel.
- Option jumpers: JP1: Disables the encoder wheel from being able to adjust the configuration settings
- JP2 – JP5: Not used
- Environmental: 0-40 °C (32-104 °F); 10-90% humidity, non-condensing
- Cooling: Convection cooling, no fan required
- Color: Green circuit board, black DIN tray
- Size and weight: 2.75”H × 4.25”D × 9.375”W, 1 pound
