LD Systems MAUI 44 G2 SUB Powered Subwoofer Extension for MAUI 44 G2

LD provides the powered MAUI® 44 G2 SUB-woofer, which broadens the cardioid properties of our professional column loudspeaker series down to the Bass range.

Simply position the SUB next to your MAUI® 44 G2 facing the rear direction, press the cardioid button and you will have a quieter and controlled Low-End on the back while still keeping the punch on the front. Low-End frequencies on the back of the system will be dampened by -15 dB. For extra Bass, keep the SUB in the same direction as your MAUI® 44 G2 without pressing the cardioid button.

Setting up the SUB with your MAUI® 44 G2 is straight forward and fast. Thanks to its automatic set-up detection system the SUB immediately switches to secondary mode as long as no column is attached.

A protection cover and caster board (sold separately) are also available to minimize wear and tear on you and your sub!

The MAUI® 44 G2 SUB features the same design construction as the MAUI® 44 G2 subwoofer and will be the perfect addition to get your Low-End in control.

LD Systems MAUI44G2SUB Features:

• Powered 15" subwoofer with flow-optimized bass-reflex ports
• 15" custom-designed woofer with deep bass down to 37 Hz
• Preset-Switch for cardioid subwoofer configuration
• DynX® DSP technology for distortion-free sound at maximum volume
• Automatic set-up detection
• Rugged subwoofer housing made out of polyurea-coated birch plywood
• Shockproof front grille for ultimate speaker protection
• Two ergonomic handles covered in rubber for easy handling
• Attachment points for our MAUI® 44 G2 CB castor board

LD Systems MAUI44G2SUB Specifications:

• Type: Powered
• Low/mid driver dimensions: 15 "
• Woofer size: 381 mm
• Woofer magnet: Neodymium
• Woofer brand: Custom-made
• Woofer voice coil: 4 "
• Woofer voice coil (mm): 101 mm
• Amplifier: Class D
• RMS: 800 W
• Peak power: 1600 W
• Max. SPL (peak): 126 dB
• Protection circuits: Convection , DC , limiter , short circuit , thermal overload
• Controls: Bluetooth HOLD TO LINK button , Bluetooth STEREO LINK button , Cardioid On/Off , Main level , Power On/Off , Sub level
• Indicators: Bluetooth , Bluetooth STEREO LINK , Cardioid On/Off , Limit , Power , Protect (protection circuit engaged) , Signal , secondary mode
• Line inputs: 2
• Line input connectors: 2 x XLR
• Line outputs: 2
• Line output connectors: 2 x XLR
• Loudspeaker outputs: 1
• Speaker output connections: Custom-made multipin
• Operating voltage: 100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , Switching power supply
• Operating Temperature: 0 - 40 °C
• Relative Humidity: < 80% (non-condensing)
• Cabinet material: 18 mm Birch Plywood
• Cabinet surface: Polyurea
• Cabinet construction: Bass Reflex
• Bluetooth Standard: A2DP
• Bluetooth Audio Decoder: AAC , aptX , SBC
• Bit depth AD/DA converter: 24 bit
• Sampling frequency: 48 kHz
• Signal-to-noise ratio: 106 dB
• Width: 434 mm
• Height: 634 mm
• Depth: 637 mm
• Weight: 36,4 kg