Product Overview
The SLXD14D dual wireless system features the SLXD4D digital receiver with two SLXD1 bodypack transmitters.
SLX-D Digital Wireless delivers transparent, 24-bit digital audio and rock solid RF performance with easy setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-leading digital wireless technology and design, the SLXD1 easily syncs with a wireless receiver. TQG connectivity to a variety of microphone options guarantees the right solution for a wide range of applications, from day-long conference to nighttime performances.
Operate up to 32 compatible systems per 44 MHz band, with easy setup and optional rechargeability accessories for wireless excellence, wherever required. Ships with SLXD4D dual-channel receiver and 2 SLXD1 bodypack transmitters with antenna and rackmount accessories and four AA batteries.
Includes
- SLXD4D Dual-Channel Receiver
- (2) SLXD1 Bodypack Transmitters
- Antenna and rackmount accessories
- (4) AA batteries
Features
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 118 dB dynamic range
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over scan and IR sync
- Compatible with Shure Wireless Workbench® control software
- Remote monitoring and control via ShurePlus™ Channels app
- Rugged metal construction
- Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
- TQG connectivity offers a variety of microphone options
- Ergonomic, durable plastic construction
Specifications
- SLX-D SYSTEM
- RF Carrier Frequency Range (varies by region)
- G58 - 470 MHz to 514 MHz
- H55 - 514 MHz to 558 MHz
- J52 - 558 MHz to 602 MHz; 614 MHz to 616 MHz
- Working Range - 100 m (328 ft) (actual range depends on RF signal absorption, reflection and interference)
- RF Tuning Step Size (varies by region)
- JB Band: 125 kHz
- All Other Bands: 25 kHz
- Image Rejection - >70 dB
- RF Sensitivity - −97 dBm at 10-5 BER
- SLXD4D DIGITAL WIRELESS RECEIVER
- Housing: Galvanized Steel
- Power Requirements: 15 VDC @ 600 mA Supplied by external power supply (tip positive)
- RF Input
- Spurious Rejection: > 75 dB; Typical
- Connector Type: BNC
- Impedance: 50 Ω
- Audio Output
- Gain Adjustment Range: –18 to +42 dB in 1 dB steps
- Configuration:
- 1/4" (6.35 mm): Balanced (Tip=audio +, Ring=audio –, Sleeve=ground)
- XLR: Balanced: (1=ground, 2=audio +, 3=audio –)
- Impedance:
- 1/4" (6.35 mm): 1.3 kΩ (670 Ω Unbalanced)
- XLR (line): 400 Ω (200 Ω Unbalanced)
- XLR (mic): 150 Ω
- Full Scale Output:
- 1/4" (6.35 mm): +15 dB differentially (+9 dBV single)
- XLR (LINE setting): +15 dBV
- XLR (MIC setting): –15 dBV
- Mic/Line Switch: 30 dB pad
- Phantom Power Protection: Yes; 1/4" (6.35 mm) & XLR
- Networking
- Network Interface: Single Port Ethernet 10/100 Mbps
- Network Addressing Capability: DHCP or Manual IP address
- Maximum Cable Length: 100 m (328')
- Dimensions (H×W×D): 1.65" × 15.5" × 5.98" (42 × 393 × 152 mm)
- Weight: 3.2 lb (1451 g) without antennas
- SLXD1 BODYPACK TRANSMITTER
- Battery Type: Rechargeable Li-Ion or 1.5 V AA batteries
- Dimensions (H × W × D): 3.86 × 2.68 × 1.0 in (98 × 68 × 25.5 mm)
- Weight: 3.1 oz (89 g)
- Housing: PC/ABS
- Connector: 4-Pin male mini connector (TA4M)
- Configuration: Unbalanced
- Impedance: 1 MΩ
- Maximum Input Level: 8.2 dBV (2.57 Vrms, 7.27 Vpp)
- Preamplifier Equivalent Input Noise (EIN): –118 dBV
- Antenna Type: 1/4 Wave
- Occupied Bandwidth:
- Modulation Type: Shure Propietary Digital
- Power: 1 mW/10 mW. Varies by region. See Frequency Range and Output Power Table.
- Compatible Microphones (sold separately):
- WL183: Omnidirectional Condenser, Lavalier Microphone
- WL185: Cardioid Condenser, Lavalier Microphone
- WL93: Omnidirectional Miniature, Condenser Microphone
