Product Overview
This is the ATW-3212NC710, a fourth-generation 3000 Series wireless system, that features an ATW-R3210N network-enabled receiver along with an ATW-3202 handheld transmitter with an ATW-C710 cardioid condenser microphone capsule. Audio-Technica's fourth-generation 3000 Series wireless systems give power and flexibility with its class-leading 60 MHz tuning range, more than twice that of previous generations, plus its two available frequency bands (DE2: 470–530 MHz and EE1: 530–590 MHz), and an operating range of 300' (100 m). Easily scan and select frequencies on the receiver and then sync with the transmitter via the IR sync functionality, plus set a backup frequency that can be quickly swapped by pressing the transmitter's multifunction button in the event of unexpected interference. The transmitters of the 3000 Series also feature rugged, metal housings and are powered by two AA batteries. Industry-standard threading on the ATW-T3202 handheld transmitter allows for the use of any one of A-T's six interchangeable cardioid capsules or other compatible capsules.
Non-network version also available.
Includes
- ATW-R3210N Network-enabled Receiver
- ATW-T3202 Handheld Transmitter
- ATW-C710 Cardioid Condenser Microphone Capsule
- AT8631 Joining Plate
- (2) Flexible UHF antennas
- AC adapter
- Rack-mount Adapters
Features
- Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in two frequency bands: DE2 (470–530 MHz) and EE1 (530–590 MHz)
- Unique multifunction button on the handheld and body-pack transmitters can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered
- Network-enabled system, featuring the ATW-R3210N receiver, offers network monitoring and control via Wireless Manager software
- True Diversity operation reduces dropouts
- Auto Squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference
- Frequency scan and IR sync functionality for ease of setup
- Dual-mode receiver display can switch between standard view or a performance view that highlights key metering
- Transmitters and receivers include OLED screens for optimal readout of key settings and alerts
- Antenna power available for powered antennas and other in-line RF devices
- Ground-lift switch helps eliminate audible hum caused by ground loops
- Balanced and unbalanced audio output jacks
- Handheld transmitter offers extremely low handling noise and includes an industry-standard thread mount for use with six interchangeable A-T microphone capsules, as well as other compatible capsules (capsules sold separately)
- Charging terminals on transmitters work with ATW-CHG3 and ATW-CHG3N smart charging docks to recharge NiMH batteries (docks sold separately)
Specifications
- OVERALL SYSTEM
- Operating Frequencies:
- Band DE2: 470.125 to 529.975 MHz (2395 frequencies)
- Band EE1: 530.000 to 589.975 MHz (2400 frequencies)
- Note: some frequency bands might not be available in your territory or could come with a limited tuning bandwidth / transmitting power due to local regulations
- Minimum Frequency Step: 25 kHz
- Modulation Mode: FM
- Maximum Deviation: ±36 kHz (THD:10%)
- Dynamic Range: > 115 dB (A-weighted), typical
- Total Harmonic Distortion: < 1.0% (at 1 kHz, ±17.5 kHz deviation)
- Operating Range: 100 m (328'); Open range environment with no interfering signals
- Operating Temperature Range: -5°C to +45°C (23°F to 113°F)
- Frequency Response: 25 Hz to 16,700 Hz
- Frequency response depends on attached microphone element
- Maximum Simultaneous Use (Recommended): 40 Channels per band; region and band dependent
- RECEIVER
- Receiving System: True Diversity
- Image Rejection: 60 dB nominal
- RF Sensitivity: 20 dBuV at 60 dBA S/N ratio (50 ohms termination)
- Antenna Power: 12 V DC, 160 mA (combined)
- Maximum Output Level:
- XLR, balanced: +14 dBV
- 6.3 mm (1/4"), unbalanced: +8 dBV
- Antenna Input: BNC-type, 50 ohms
- Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
- Dimensions (WxDxH): 210.0 x 191.0 x 43.4 mm (8.27" x 7.52" x 1.71")
- Net Weight: 1100 g (38.8 oz) without accessories
- HANDHELD TRANSMITTER
- RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
- Spurious Emissions: Following Federal and National Regulations
- Microphone Capsule: Interchangable industry standard thread
- Battery Life:
- Alkaline:
- High: 8.0 hours
- Low: 9.0 hours
- Ni-MH 1900mAh:
- High: 9.0 hours
- Low: 9.5 hours
- Depending on battery type, usage, and environmental conditions
- Dimensions:
- ATW-T3202 (without capsule): Length: 193 mm (7.60"); Maximum Diameter: 37 mm (1.46")
- ATW-T3202/C710: Length: 271 mm (10.67"); Maximum Diameter: 50 mm (1.97")
- Net Weight:
- ATW-T3202 (without capsule): 200 g (7.1 oz) without batteries
- ATW-T3202/C710: 314 g (11.1 oz) without batteries
- Batteries: (2) 1.5V AA not included
- MICROPHONE CAPSULE
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Dimensions:
- Height: 85 mm
- Neck Diameter: 37 mm
- Head Diameter: 50 mm
- Weight: 114 g (4.0 oz)
