Doug Fleenor Design PRE10ETHER-A Ethernet Preset 10 Architect, snapshot recorder, 2 gang wall

Doug Fleenor's Pre 10 etehr is a network DMX playback device configured for four separate 512 channel universes that fits easily into a standard 2-gang back-box. The device can record up to ten snapshots or preset scenes of sACN data which can then be recalled via the front panel buttons.

Pre 10 modules can function on the same network in a master and remote configuration or as stand alone devices. The stations can draw network power via PoE or by a low voltage power supply (available separately). These are self contained modules with no requirement for an external processor or central control unit.

Doug Fleenor Designs PRE10ETHER-A Includes:

• PRE10ETHER-A

Doug Fleenor Designs PRE10ETHER-A Features:

• Multiple stations can reside on the same network in either a “Main & Remote” relationship, or as completely independent devices.
• Power can be supplied via PoE, or by a separate low voltage power supply.
• Each station is fully self-contained and does not require a separate processor device or central control unit.
• Fade times for each preset can be adjusted from 0 to 999 seconds (default is 2 seconds).
• Fits in a standard 2-gang back box.

Doug Fleenor Designs PRE10ETHER-A Specifications:

• Input: E1.31 sACN – 4 Universes – 10/100 Mbps Ethernet
• Output: E1.31 sACN – 4 Universes – 10/100 Mbps Ethernet
• Connector: RJ45
• Indicators: Ten Green Illuminated Button Caps
  • One yellow Fade time LED
  • One red Signal/Record LED
• User Controls: Ten Preset Select Buttons
  • One Recessed Record Button
  • One Recessed Fade Time Button
  • One Rotary Encoder with Knob
  • One Graphical LCD Screen
• Options Jumpers: All jumpers installed at ship time