Audio-Technica ATW-B80WB Pair of In-Line UHF Antenna Boosters

Featuring a pair of UHF wideband powered in-line antenna boosters, the ATW-B80WB package from Audio-Technica is designed to increase the RF signal strength to compensate for antenna cable loss. When paired with the appropriate UHF antennas these boosters are especially suited for situations where long RF cable runs exist between the antennas and receiver locations.

Designed for use both in temporary or permanent installations of Audio-Technica UHF receivers and RF Venue antenna distribution systems along with other devices providing 12 VDC antenna power. Equipped with an integral RF amplifier, that system power is required for operation of each booster via the antenna cable, with a power active indicator that illuminates when when power is applied. A gain setting button allows selection of +12 or +6 dB operation to compensate for cable losses or other adverse operating conditions. Inputs and outputs (I/O) are provided through standard BNC-type connectors. The booster units feature metal construction with stainless steel finish which helps minimize the RF interference.

Features

• Pair of Wideband UHF in-line antenna boosters
• Compact lightweight design
• Metal construction with stainless steel finish
• Selectable +6 dB and +12 dB gain
• Power status LED indicator
• Wideband operation (470 MHz to 990 MHz)
• Requires 12 VDC antenna bus power via coaxial cable

Specifications

• RF frequencies range: 470-990 MHz
• Impedance: 50 Ω, typical
• Signal gain:
  • 6 dB position: 6 dB typical (green)
  • 12 dB position: 12 dB typical (red)
• I/O connector: BNC-J
• Power supply voltage: 12 VDC (Bus powered)
• Current/Power consumption: 60 mA
• Operating temperature range: -10 °C to 60 °C
• Dimensions: 0.98" x 0.98" x 3.62" (25 x 25 x 92mm)
• Weight, excluding holder: 4.41 oz. (125 g)
• Note: further information can be found within the items located under the "Documentation" tab above.