JBL Control 25AV-LS Ul Life Safety Version Of Control 25AV

The JBL Control® 25AV-LS is built on the same platform as their popular Control 25AV and is UL 1480 UUMW Listed for use in fire alarm and/or emergency communication systems. The Control 25AV-LS utilizes a deep cabinet, high power components and complex network to achieve extremely smooth high fidelity performance from a compact 2-way loudspeaker. Premium performance capability and even coverage ensures excellent sound quality throughout the listening area. A top-quality, low saturation transformer, enables the loudspeaker to be used on either 70 volt or 100 volt distributed speaker lines, with similar fidelity performance to the 8 ohm bypass position.

The patented InvisiBall® mounting method is simple to install, aims easily, and provides a high degree of theft deterrence. The cabinet accepts a variety of paints to match any décor. Weather resistance is maximized by utilizing an aluminum grille featuring polyester powder coating and liquid-tight MTC-PC2 terminal covers.

Coating the woofer cone in polypropylene and terminating its circumference in JBL's WeatherEdgeTM, a seamless, butyl rubber extension of the woofer surround, protects critical transducer elements. The polycarbonate tweeter diaphragm is reinforced with a thin film of titanium for added rigidity and endurance. Nickel/zinc rust-resistant terminals ensure a secure input connection.

Includes

• Control 25AV-LS loudspeaker
• 1 pc MTC-PC2 input panel cover
• Invisiball mounting base
• 6 mm x 100 mm Invisiball hex wrench

Features

• UL 1480 UUMW Listed for Use in Fire Alarm and/or Emergency Communication Systems
• Extremely Smooth Frequency Response
• Aluminum Grille with Polyester Powder Coating for Enhanced Durability
• 60 Watt Transformer for 70V or 100V Lines, with 8 ohm Bypass
• SonicGuard™ Overload Protection
• 130 mm (5-1/4") Polypropylene Coated Woofer, 10 mm (3/4") Titanium Coated Horn-Loaded Tweeter
• Includes InvisiBall® Mounting Hardware and Sealed Input Panel Cover
• Captive Screw-Down Input Terminals
• 110° x 85° High-Frequency Horn

Specifications

• Frequency Range (-10 dB) (half-space): 90 Hz - 20 kHz
• Power Capacity*:
  • 200 Watts Continuous Program Power
  • 100 Watts Continuous Pink Noise
• Nominal Sensitivity: 87 dB
• Nominal Coverage Angle*: 110° x 85° (1kHz to 16kHz)
• Directivity Factor (Q): 4.8 (500 Hz to 4kHz)
• Directivity Index (DI): 6.5dB (500 Hz to 4kHz)
• Rated Maximum SPL: 107 dB @ 1 m (3.3 ft) average, 113dB peak
• Rated Impedance: 8 ohms (in bypass mode)
• Transformer Taps: 60W 30W, 15W, (& 7.5W @ 70V)
• LF Driver: 130mm (5.25") with polypropylene coated paper cone with WeatherEdge surround, 25 mm (1") voice coil on kapton former
• HF Driver: 20mm (0.75") titanium coated PEI
• Input Connectors: Captive screw-down terminals, zinc-plated copper base, nickel-plated metal screws/washers, accepts up to 9mm outside 4 mm inside open lug, plus bare wire up to 12 AWG (2.5 mm)
• Cabinet Material: High Impact Polystyrene, (materialsrated UL-94HB)
• Grille: Aluminum with polyester powder coating
• Safety Agency: UL1480-UUMW Listed, UL2043, NFPA90, NFPA70A, and in accordance with the requirements of IEC60849/EN60849
• Dimensions: 9.3" H x 7.4" W x 6.3" D (236 x 186 x159 mm)
• Net Weight: 8.4 lbs. (3.8 kg) each
• Shipping Weight: 19 lbs. (8.6 kg) per pair
• * Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous Program power is a conservative expression of the system’s ability to handle normal speech and music program material, and is defined as 3 dB above the Continous Pink Noise Rating.