Audio-Technica AT-LPW40WN Fully Manual Belt-drive Turntable with Switchable Phono Preamp

Optimal high-fidelity audio reproduction for your favorite vinyl—the AT-LPW40WN from Audio-Technica is a fully manual, belt-drive turntable delivering stellar sound with a sleek look. Along with the simulated walnut veneer, it features and aesthetically pleasing anti-resonance Medium Density Fiberboard (MDF) plinth to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation for 33 and 45 RPM speeds. The straight carbon fiber tonearm has smooth, adjustable tracking force and an AT-HS4 universal 1/2" mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge—elliptical stylus included (0.3 x 0.7 mil) compatible with any VM95 series replacement stylus if needed. Equipped with a built-in phono preamp and detachable dual RCA output cable, this turntable connects directly to stereo, speakers, and other components with or without a dedicated phono input. Easy on the eyes for easy listening—experience the high-fidelity audio of AT-LPW40WN.

Includes

• AT-VM95E phono cartridge
• AT-HS4 headshell
• Dual RCA (male) to dual RCA (male) cable with ground wire
• Counterweight, rubber mat, and dust cover
• 45 RPM adapter

Features

• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Motor features a speed-sensor system to maintain accurate platter rotation speed
• AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus (AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application)
• Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
• Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer
• Built-in switchable phono pre-amplifier for phono or line-level output
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Specifications

• Type: 2-speed, fully manual operation
• Motor: DC servo motor w/speed stability control
• Drive Method: Belt drive
• Speeds: 33-1/3 RPM, 45 RPM
• Turntable Platter: Die-cast aluminum
• Wow and Flutter: 0.15% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio: >60dB
• Output Level: Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
• Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
• Power Supply Requirements: 100-240V AC, 60 Hz
• Power Consumption: 1 W
• Dimensions: 17.13" x 13.90" x 5.04"
• Weight: 10.4 lbs.
• Tonearm type: Balanced straight tonearm with detachable headshell
  • Effective arm length: 223.6 mm
  • Overhang: 18.6 mm
  • Tracking error angle:
  • Applicable cartridge weight: 12-17 g
  • Anti-skating range: 0-3 g
  • Replacement Stylus: AT-VMN95E