Product Overview
The RE3-RX is a professional rack-mountable, ½ space diversity receiver. Designed to function as the control center for an RE3 wireless set, it features frequency scanning and synchronizing, as well as full transmitter control settings which synchronize to a mated transmitter.
The RE3-HHT is a lightweight, yet robust UHF handheld transmitter body. It is ideally-suited for professional performance and presentation applications. Due to its commonly-used 1.25” diameter, 28 UN-2A thread pitch microphone head coupling, it accepts mic heads using this common coupling convention. Although primarily intended to accept the ND and RE Series heads developed for RE3 listed in the compatible products section of this data sheet, the RE3-HHT will adapt other microphone heads using the 1.25” diameter, 28 UN-2A thread pitch coupling scheme.
The Electro-Voice ND76-RC3 is a robust, highperformance, dynamic cardioid thread-on vocal microphone head for wireless handheld transmitters. This microphone head electrically and mechanically adapts to Electro-Voice (and many other brands) wireless handheld transmitters that use the common 3-contact rings, 1.25” diameter by 28-thread pitch coupling convention. The floating captured ID collar will spin freely until screwing the head on tightly. It will remain locked in place when fully tightened. This allows the desired orientation of the branding to the transmitter.
Setup is quick and simple using the RE3 clear frequency scan and sync functions, and the radio link between the robust handheld transmitter and diversity receiver delivers rock-solid system performance.
Includes
- RE3-RX Diversity Receiver
- RE3-HHT Handheld Transmitter
- ND76-RC3 Wireless Head with ND76 Capsule
- Microphone stand adapter
- (2) Receiver antennas
- (2) AA batteries
- Receiver rack mounting hardware
- Universal power supply
Features
- RE3 Diversity Receiver
- Diversity reception minimizes dropouts
- Up to 36 MHz tuning bandwidth (band specific) for trouble-free operation
- Easy-to-read LCD display
- Frequency scanning for selecting open frequencies
- Sync function links transmitter to receiver for easy setup
- RE3 Handheld Transmitter
- Robust metal body
- Up to 36 MHz tuning bandwidth (band specific)
- Selectable low and high output power (band specific)
- Common threaded coupling allows microphone head interchangeable
- Sync function for easy frequency setup
- ND76-RC3 Wireless head with ND76 capsule
- Thread-on microphone head for Electro-Voice and other brand's wireless handheld transmitters
- Excellent all-around vocal performance: crisp, clear and balanced
- Large diaphragm dynamic capsule creates a rich and detailed frequency response
- Shock-mounted capsule minimizes handling noise
- Memraflex grille resists denting
Specifications
- RE3 Diversity Receiver
- Frequency oscillation mode: Phase-locked loop (PLL)
- Carrier frequency range: 488 - 663 MHz (tuning bandwidth is band dependent)
- Band names, tuning bandwidths, and carrier frequency ranges:
- 5L: 36 MHz (488-524 MHz)
- 5H: 36 MHz (560-596 MHz)
- 6M: 10 MHz (653-663 MHz)
- Sync frequency: Ultrasonic 40 kHz
- Diversity: Antenna diversity
- Bandwidth: 36MHz
- Signal/Noise ratio: >100dB(A)
- Total harmonic distortion (THD):
- Receiving sensitivity: -81dBm for -12dB SINAD
- Frequency response:
- 63Hz~16kHz±2dB (BPT)
- 51Hz~16kHz±2dB (HHT)
- Antenna type: Detachable ½ wave with BNC connector
- Antenna booster power: DC12 - 15V/100mA
- Function display by: LCD
- Audio frequency output level, Ref：±22.5kHz Dev@1kHz Tone
- ¼” (6.3mm) Phone Jack： -10dBV
- XLR Jack： -4dBV(Line)、-24dBV(MIC)
- Audio frequency output impedance:
- 240Ω (unbalanced)
- 1400Ω (balanced)
- Squelch and noise muting: Noise muting and tone code locking
- Output ports:
- 1 x balanced XLRM jack
- 1 x unbalanced ¼” TS (6.3mm) jack
- Power supply: DC12~15V/500mA
- Finish: Black polyurethane paint
- Dimensions: Width: 8.27 in. (210mm)
- Height: (with feet attached) 1.85 in. (47mm)
- Height: (without feet attached) 1.73 in. (44mm)
- Depth: (including antenna jack) 6.89 in. (175mm)
- Depth: (not including antenna jack) 6.1 in. (155mm)
- Net weight: 2.71 lb (1.23 kg)
- Gross weight: 3.28 lb (1.49 kg)
- RE3 Handheld Transmitter
- Frequency oscillation mode: Phase-locked loop (PLL)
- Available band names, tuning bandwidths, and carrier frequency ranges:
- 5L: 36 MHz (488-524 MHz)
- 5H: 36 MHz (560-596 MHz)
- 6M: 10 MHz (653-663 MHz)
- Sync frequency: Ultrasonic
- Frequency band RF power output:
- 5L (488-524MHz): Low 10mW / High 50mW
- 5H (560-596MHz): Low 10mW / High 50mW
- 6M (653-663MHz): Low 10mW / High 20mW
- Display by: LCD + LED
- Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, RF power, auto off, key lock.
- RF stability:
- Modulation frequency shift: Wideband FM ±48kHz deviation
- Harmonic radiation:
- Battery: 2 x AA alkaline battery or NiMH rechargeable battery
- Charging contacts: Yes
- Microphone coupling: 1.25” diameter, 28 UN-2A thread pitch
- Microphone electrical contact: 3-ring/3-pin
- Finish: Black polyurethane paint
- Dimensions (without head): Height: 7.52 in. (191mm)
- Width at threaded end: 1.46 in. (37mm)
- Width at control cover: 0.856 in. (22mm)
- Net weight (without head): 12.2 oz. (346 g)
- Gross weight (without head): 16.9 oz. (480 g)
- ND76-RC3 Wireless head with ND76 capsule
- Element type: Dynamic neodymium magnet structure
- Frequency response, close: 30 Hz-17 kHz
- Frequency response, far: 70 Hz-17 kHz
- Polar pattern: Cardioid
- Sensitivity, open circuit voltage @ 1 kHz: 5.6 mV/Pascal (-45 dBV/Pa)
- Maximum SPL: 135.5 dB SPL (1% THD)
- Impedance: 1000 ohms
- Power requirements: 4-8 VDC
- Polarity: Positive pressure on diaphragm produces positive voltage at center contact relative to ground contact
- Electrical contact: 3-Ring/3-Pin
- Threaded coupling: 1.25" diameter 28 UN-2A thread pitch
- Finish: Black polyurethane paint
- Materials: Aluminum, steel, steel wire grille screen
- Dimensions
- length: 3.6 in. (91 mm)
- diameter: 2.0 in. (50.5 mm)
- Net weight: 6.5 oz (184 g)
- Shipping weight: 8.4 oz (238 g)
