Aviom BOOM-1 Tactile Transducer Processor, DSP and Amplifier, 2RU

Dramatically enhance your personal mixing experience with BASS-1 by adding optimally-processed low-frequency tactile information to an in-ear or headphone monitor mix. This well processed low-frequency tactile transducer (also known as a ‘bass shaker’) adds realism you can hear and feel to any drum throne, keyboard seat, or performance platform. The combination of personal mixers, IEMs/headphones, and tactile transducers allows performers to achieve powerful, exciting monitor mixes at lower in-ear levels. This reduces sound-level-induced fatigue allowing longer, more enjoyable performances, while also promoting long-term hearing health. BOOM-1 brings Aviom-optimized DSP to the tactile experience. Designed by the personal monitor experts, it’s easy to use and provides a natural low frequency extension to your monitoring experience. Compatible with Aviom’s industry standard A360, A320, and legacy Personal Mixers, the BOOM-1 can also be connected easily to the line- or headphone-level audio outputs of almost any audio device.

Aviom BOOM-1 Features:

• 1/4” TRS Stereo Headphone In and Thru
  • Strength control with Signal and Clip LED indicators
  • Amp Clip/Protect LED
  • Three selectable Feel presets control multiple DSP settings for user-preferred Tight to Loose feel
  • Transducer Mute with LED (easily compare your mix with and without the tactile transducer engaged)
  • Seamless integration with any personal mixing system
• Rear Panel
  • Transducer Out
  • Custom tailor the response of the BOOM-1 to a variety of tactile transducers with the DSP Profile settings
  • XLR mono input for direct connection to Aviom’s A360 Personal Mixer
  • XLR mono out, with level control, provides the DSP processed signal for connection to an external power amplifier for driving large tactile transducer arrays

Aviom BOOM-1 Specifications:

• Headphone In (front & rear): 1/4-inch TRS stereo
• Headphone Thru (front & rear): 1/4-inch TRS stereo
• Line In: XLR female, Pin 2: Hot, Pin 3: Cold; Pin 1: Ground
• Maximum Input Level: 15.98 dBV
• Input Impedance: 9.5k Ohm
• Line Out: XLR balanced; mono; with Volume control
• Maximum Output Level: 12.55 dBV
• Output Impedance: 33.2 Ohms
• Amplifier Output: 4 Ohms - 210W and 8 Ohms - 117W
• Transducer Output: 2-conductor locking speaker connector
• Power Supply: Internal, universal switching type, IEC connector; 100-240 volts AC, 50/60Hz
• Fuse: 250VAC~ T3AL
• Dimensions: 19" wide x 8.62" deep; 2U, 3.5" high
• Weight: 6.0 lbs