RTS BP6000 BP-6000

The Telex BP-6000 is a portable user station compatible with Audiocom and Clear-Com party line systems. The BP-6000 is a 2-channel beltpack equipped with a mode-sensing system configuration, meaning the beltpack determines what type of system it is installed into and configures itself according to that system.

The BP-6000 has a 4-pin male XLR connector with auto-sensing headset inputs. Dynamic and electret headset microphones are supported.

The loop and line connection both use 6-pin Switchcraft connectors requiring the purchase of an adapter cable (CA-6MSC-6FNT or CA-6FSC-6MNT) for use with Telex's ME25 or ME50 intercom cables. All cables are sold separately.

Multiple programming options are available. To simplify programming, voice prompts guide the user through the menus.

The beltpack is available in black only.

Note: Adapter cables are required for compatible loop and line connections when using Telex ME25 or ME50 cables..

Telex BP-6000 Features:

• Voice prompts for simplified configuration
• Remote Mic Kill turns off all active microphones, reducing background noise
• Programmable TALK Button, (Always) On, (Always) Off, Switched, or Momentary
• Mode-sensing System Configuration
• Updated design for modern, sleek appearance
• Reduced current draw allows for more beltpacks being powered by the power supply
• Auto-sensing headset inputs, electret or dynamic
• Uses a 6-pin Switchcraft connectors for line and loop connections

Telex BP-6000 Specifications:

• Power Requirements:
  • Max Operating Current (unbalanced): 50 mA
  • Max Operating Current (balanced): 55 mA
  • Channel Supplied: 18–33 VDC
  • Local Power: 18–33 VDC
• Environmental:
  • Operating Temperature: 32º F to 131º F (0º C to 55º C)
  • Operating Humidity: 5% to 95%, non-condensing
  • Storage Temperature: -4º F to 158º F (-20º C to 70º C)
  • Storage Humidity: 15% to 90%, non-condensing
• Dimensions (WxDxH):
  • Beltpack: 3.75” x 1.35” x 4.69” (95.2 x 34.2 x 119.2 mm)
  • With Beltclip and Top Panel: 3.75” x 1.55” x 4.79” (95.2 x 39.4 x 121.6 mm)
• Interface Requirements:
  • Headset:
    • Dynamic: 50 to 200 Ohms
    • Electret: 1k to 13k Ohms
  • Headphones: 50 to 600 Ohms
• Balanced Intercom Channel
  • Output Level: 0.0 dBu nominal
  • Noise Contribution: < -60 dBu
  • Total Harmonic Distortion: < 1.0%
• Terminating Impedance:
  • Balanced: 300 Ohms
  • Bridging Impedance: >10kOhms
• Call Signaling:
  • Send: 20 kHz
  • Receive: 20 kHz
• Mic Off Frequency:
  • Send: 24 kHz
  • Receive: 24 kHz
• Unbalanced Intercom Channel:
  • Output Level: 0.0 dBu nominal
  • Terminating Impedance: 200 Ohms
  • Noise Contribution: < -60 dBu
  • Total Harmonic Distortion: < 1.0%
• Bridging Impedance:
  • Unbalanced: >10kOhms
• Call Signaling:
  • Send: DC Only
  • Receive: DC Only
  • Total Harmonic Distortion: < 1.0%
• Headphone Amplifier:
  • Maximum Output: >140 mW into 150 Ohm load
  • Frequency Response: 200Hz - 8 kHz ±2 dB
  • Audible Alert: 1 kHz
  • Total Harmonic Distortion: < 1.0%
  • Sidetone: >20 dB dynamic range
• Crosstalk: < -60