Product Overview
The Shure MX415LPDF/C Microflex® Dualflex Gooseneck Microphones deliver unsurpassed style, control, and performance for meetings and conferences. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, Microflex Dualflex microphones make it easy to get the perfect fit for your conferencing installation.
Fully compatible with ULX-D® and QLX-D® Digital Wireless Systems when used with the ULXD8 Gooseneck Base Transmitter.
Features
- 15" (38.1 cm) in length
- Cardioid polar pattern
- Bi-color status indicator light ring
- Surface-mount and wired or wireless desktop base options
- CommShield® Technology for improved RF filtering
Specifications
- Type: Electret Condenser
- Frequency Response: 50–17000 Hz
- Polar Pattern: Cardioid
- Output Impedance: 170 Ω
- Output Configuration: Active Balanced
- Sensitivity @ 1 kHz, open circuit voltage: −35 dBV/Pa (18 mV)
- Maximum SPL, 1 kHz at 1% THD, 1 kΩ load: 121 dB
- Self Noise, A-weighted: 28 dB SPL
- Signal-to-Noise Ratio, Ref. 94 dB SPL at 1 kHz: 66 dB
- Dynamic Range, 1 kΩ load, @ 1 kHz: 93 dB: 45 dB, minimum
- Clipping Level at 1% THD: −8 dBV (0.4 V)
- Polarity:
- 3-pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- 5-pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector
- Weight: 0.07 kg (0.154 lbs)
- Logic Connections:
- LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V.
- LOGIC OUT: Active low (≤1.0V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kΩ).
- Mute Switch Attenuation: -50 dB minimum
- Cable: MX400DP, 6.1 m (20 ft) attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
- Environmental Conditions:
- Operating Temperature: –18–57°C (0–135°F)
- Storage Temperature: –29–74°C (–20–165°F)
- Relative Humidity: 0–95%
- Power Requirements: Phantom Power, 48–52 V DC, 8.0 mA
