Clear-Com FSII-Base-II FreeSpeak Digital Wireless Intercom Base Station

The Clear-Com FreeSpeak II-BASE-II is a license-free wireless base station that operates in the 1.9GHz and 2.4GHz frequency bands and is designed for extensive communication in large-scale operations. This base station supports up to 25 Beltpacks and 10 antennas. (Two antennas can connect to the base station directly or up to 10 antennas can be connected by using two x FSII-SPL splitters) The base station has connections for four party-lines and four 4-wires plus a dedicated SA output and dedicated program audio input.

The Clear-Com FreeSpeak II-BASE-II has a Multi-mode user interface that has monitoring, setup and main station modes with assignable soft keys along with an XLR-4 pin male headset connection. To use the fiber connections to the FSII-SPL Splitter please choose suitable SFP transceivers from either HLI-MMFO or HLI-SMFO.

NOTE: SFP modules can vary in electrical capabilities despite being mechanically compatible. Clear-Com can only support Clear-Com supplied SFP transceivers which have been tested with Clear-Com products.

Clear-Com FSII-Base-II Features:

• Supports both 1.9GHz and 2.4GHz FSII beltpacks on a single base station
• Browser-based configuration tool
• Four 2-wire ports with call signal, auto-nulling
• Four 4-wire ports with call signal
• Matrix and party line configurations support up to 12 channels and/or groups
• Dedicated front panel keys for remote mic kill, stage announce and alltalk

Specifications

• Technical:
  • Base-to-Beltpack Frequency Response: 100 Hz – 7.1 kHz
  • No. of Beltpacks per Base Station: 25
  • No. of Transceiver/ Antennas Supported by Base: 10
  • No. of Active Transceiver Ports: 2, one port can remotely power up to 1 FSII splitter or 1 FSII transceiver
  • PC Programming Port: 2x LAN RJ45
  • Relay Port: DB15, supports one relay assigned to the SA out
  • Partyline A , B, C, D (each): XLR-3F, on/off termination switch, Clear-Com and RTS compatible
  • Partyline Power On/Off: A/B, C/D paired
  • Partyline Output Voltage: 26 – 28 VDC, 800 mA per pair (A/B or C/D)
  • 4-Wire/Matrix Connection: 4x RJ-45
  • Program Input: XLR-3F, transformer isolated, line-level input
  • Stage Announce Output: XLR-3M, transformer isolated, line-level output
  • Front Panel Headset: 4-pin male and 5-pin female options
  • Front Panel Displays: 4 OLED's with encoders and assignable soft keys
  • Front Panel Indicators: Antenna Status, Beltpack Status
  • External Power Supply Connection: 12 VDC
  • Base Station Programming/Editing: Push-to-enter rotary encoder
• Power:
  • Input: 100-240 VAC, 1.4 A max
  • Output: 12 VDC, 60 W, 5 A
  • Current Draw: 12 V, 4 A max, 48 W max
• Physical:
  • Dimensions (H x W x D): 1.75" x 19.0" x 10.2" (44 x 483 x 259mm)
  • Weight: 5.57 lbs. (2.5 kg)