DPA Microphones ST2006A
Stereo Matched Pair of 2006A Omnidirectional Microphones

OUR PART #:  ST2006A

The DPA ST2006A is a complete DPA 2006A Stereo Pair with two handpicked omni microphones, selected on sensitivity within ±1.5 dB.
Learn More
Our Price: $1,979.95
Write the first review.
DPA Microphones ST2006A
Qty:
Usually ships in 7-14 business days.
Need it sooner? Call us!

Related Products

The DPA ST2006A is a complete DPA 2006A Stereo Pair with two handpicked omni microphones, selected on sensitivity within ±1.5 dB.

As main AB stereo pair the 2006As deliver precise acoustic fingerprint and true tone. Orchestra, acoustic piano, guitar, wind instruments and choirs are among the most evident applications for this high-value-for-money pair.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone and accessory inlays.

Features:

  • Sensitivity selected pair
  • Acoustic authenticity
  • Linear in a large frequency bandwidth
  • Peli™ Case transportation and protection

Specifications:

  • Directional pattern:  Omnidirectional
  • Principle of operation:  Pressure
  • Cartridge type:  Pre-polarized condenser, Twin Diaphragm Capsule
  • Frequency range:  20 Hz - 20 kHz
  • Frequency range, ± 2 dB:  50 Hz - 20 kHz with typ. 3 dB soft boost at 14 kHz
  • Sensitivity, nominal, ± 2 dB at 1 kHz:  40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted:  Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))
  • Equivalent noise level, ITU-R BS.468-4:  Typ. 28 dB (max. 30 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):  Typ. 78 dB(A)
  • Total Harmonic Distortion (THD) at 1 kHz:  < 1 % up to 130 dB SPL peak
  • Dynamic range:  Typ. 114 dB
  • Max. SPL, peak before clipping:  141 dB
  • Switchable attenuator:  0 dB / -20 dB
  • Output impedance:  < 200 ohm
  • Minimum load impedance:  2 kohm
  • Cable drive capability:  100 m (328 ft)
  • Output balance principle:  Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR):  > 60 dB
  • Power supply (for full specifications):  48 V Phantom power (± 4 V)
  • Current consumption:  2.8 mA
  • Connector:  XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color:  Matte black
  • Weight:  160 g (5.6 oz)
  • Microphone diameter:  19 mm (0.75 in)
  • Length:  164 mm (6.5 in)
  • Output voltage, RMS:  > 5 V
  • Polarity:  +V at pin 2 for positive sound pressure
  • Temperature range:  -40 °C to 45 °C (-40 °F to 113 °F)
  • Relative Humidity (RH):  Up to 90%
  • Sensitivity selection tolerance (at 1 kHz):  ± 1.5 dB

What's Included:

  • Two carefully matched 2006A omni microphones
  • Sturdy PeliTM case
  • Holders
  • Windscreens

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information