Mounts, Brackets, Enclosures for Speakers

The Electro-Voice EBK-3 is a 3-pack forged 3/8-16 eyebolt kit.

Black wall mounting bracket for 8000 series. Security wire available (see page 11 of Genelec's Accesories Brochure PDF under "Documents").

The D.A.S. Audio ANL2 is a set of 4 forged steel eyebolts for flying D.A.S. Audio's RF, ST, Compact, and Artec speakers.

The SSB-1900 is a rust resistant steel, load bearing support with a medium depth, 18.0 CID steel ‘1900’ electrical junction box. NOTE: Shown above with electrical junction box, which is NOT included. Intended Use: Parallel to floor pla ...

The Bogen CK10W is a 10 ft cable kit for use as a main drop cable or safety cable with Bogen pendant speakers.

The SE10GVP is a steel, vandal resistant, surface mount enclosure for 3-gang call-in or listen-in stations. There are four (4) 6-32 threaded inserts on a standard 3-gang center and the conduit entrances are 1/2." Gray powder coat finish. R ...

"U" bracket for wall/ceiling mounting of Arco 24 or Arco 24T.

Tannoy's VariBALL bracket system has been developed to ensure a fast and safe single person install, while allowing for the enclosure to be positioned at the optimum listening angle no matter where the loudspeaker is situated. Once the opt ...

The 95-8-10 recessed round enclosure facilitates the mounting of 8" speakers and comes with a perforated mounting strap, conduit knockouts, and J-clips. Designed for 8" speakers, the 10" depth of this enclosure along with a generous fiberg ...

The SMB-1, 2, 3 and 4 surface mount boxes hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates. Knockouts are provided for fastening standard metric or North American conduits to the rear ...

Accommodates a Wide Selection of Atlas Sound Baffles Eliminates the Need for Tile Bridges and Time-Consuming Screw Mounting Patented Enclosure/Rail System Installs Easily to Provide Time and Labor Savings Atlas Sound 96-8 is a cost-efficie ...

Use the Atlas Sound SEN Enclosure When Outdoor Surface Mounting VT Series Loudspeakers is Required Neutral Gray Finish Surface-mounting exterior backbox provides weatherproof installation for VT Series loudspeakers. Unit is tapped for 1/2" ...

With pre-drilled holes to aid installation, the 180-2 channel bars are used to support speaker assemblies housed in suspended ceilings. The channel bars are intended to be used with a baffle or enclosure (available separately) and can't be ...

Plastic Mounting Ring Ideal For Retrofit Applications With Hard-To-Access Ceilings. Conveniently Installed From Ground Level Construction Is Polystyrene Plastic, Four J-nuts Included Plastic mounting ring is ideal for retrofit applications ...

Features: Includes 5/8" - 27 Treads For Mounting To Mic Stand Neutral White Finish OEM Replacement Mounting Bracket For SM82 Dimensions (H x W x D): 5 5/8" x 16 3/4" x 1 1/2"

This easy to use kit enables fast and easy attachment of the ButtKicker Advance to all types of furniture. The kit includes five RI-4 rubber isolator feet plus all necessary mounting hardware.

The Anchor Audio SB-3BK+ is a 40-degree tilt wall mount speaker bracket that's designed for use with their AN-130+, AN-135+, AN-100CM+, AN-1000X+ product lines. It is compatible not only with the newer "plus" versions, but also the older " ...

The YOKE HORIZONTAL VX 5.2/VX 6 accessory bracket provides tilt rotation in the long axis of VX 5.2, VX 6 and VXP 6 loudspeakers for accurate audience coverage, and boasts a safety factor of 10:1 allowing unparalleled installation security ...

Providing installation flexibility for 4" speakers, the 51-4-HC has been Hyfidrophobically treated for use in high-humidity / excessive moisture applications. Atlas' Hyfidrophobic treatment induces liquid to simply roll off without touchin ...

The Anchor Audio SB-360BK+ is a 360° swivel wall bracket speaker mount in black that is designed for use with Anchor Audio's AN-130+, AN-135+, AN-100CM+ and AN-1000CX+ product lines. This mount is also compatible with "non-plus" versions ...

The ECPB-PB-U U-Bolt Kit is a specialized accessory designed for use with the ECPB Plug-In Station. This kit is tailored to provide a secure and reliable mounting solution, ensuring the stability of the Plug-In Station in various installat ...

Achieve optimal mounting efficiency for your FrontRow ProDigital receiver by utilizing the FrontRow Wall Mount Kit. This kit offers a sturdy and durable construction, guaranteeing maximum longevity and reliability.

On-Stage Stands' SS7920B dual-mount speaker bracket is constructed from steel and features standard 1-3/8" inserts. Recommended for use with On-Stage Stands' LS/SS7770 10 ft. universal lighting/speaker stand. Specifications: Color: Black P ...

The UB-0750 is designed to secure and safely aim loudspeakers weighing up to 60 pounds from structural surfaces including walls, ceilings, under balconies, and overhangs. The loudspeaker can rotate within the arms of the bracket, providing ...