Intercoms, Two-Way Radios

Clear-Com's MS-704 Four-Channel Main Station supports up to 55 beltpacks, 10 speaker stations or 12 headset stations in its 2RU construct. Other qualities of note include programmable front panel buttons, individual channel short-circuit p ...

LQ IP interfaces are compact boxes that enable connection of 2-wire partyline and 4-wire audio devices over LAN, WAN or Internet IP infrastructures. This model is the 2-wire (LQ-2W2) option. This two channel Partyline IP communications int ...

This software license will upgrade the beltpack capacity of an FSII-BASE-II-5 base unit from 5 beltpacks to 25 beltpacks.

Designed for use in theatres, live performances, industrial environments, and small television facilities the KB-701 remote speaker station connects to a single channel of party-line intercom, and operates in half-duplex mode, similar to a ...

Clear-Com's SB-704 is a 2RU four-channel switchboard main station with programmable front panel buttons, individual channel short-circuit protection, individual channel volume control, a switchboard matrix, and a regulated fail-safe power ...

Accepting either a balanced or unbalanced line-level audio input through the DB-15 connector on the rear, the RM-702 is one of a series of professional intercom stations from Clear-Com that is specifically designed for the broadcast indust ...

The PT-8 is a compact, handheld dynamic, low impedance communications microphone with a 50 -16kHz frequency response. Designed for compatibility with Clear-Com Encore® Analog Partyline and Eclipse® HX Digital Matrix devices, this handset ...

The Clear-Com FreeSpeak II-BASE-II is a license-free wireless base station that operates in the 1.9GHz and 2.4GHz frequency bands and is designed for extensive communication in large-scale operations. This base station supports up to 25 Be ...

Clear-Com TWC703 TW Adapter for the RS703 The TWC703 takes two single channels from a Clear-Com partyline and combines them to a TW line, allowing the addition of a dual channel TW segment to any Clear-Com partyline system. TW connectivity ...

A compact box from Clear-Com, the LQ-4W2 allows you to link 4-wire Intercom Systems as this enables connection of 4-wire audio devices over LAN, WAN, or Internet IP infrastructures. The LQ-4W2 is part of their LQ series of audio over IP in ...

Provides a visual and/or audible signal of a "call" when integrated to a Clear-Com or compatible intercom system. Features Brightness level for Flasher Volume level for Tone Choose Flash, Tone, or Both

Clear-Com's Ethernet Linking Module HLI-ET2 plugs into any available slots on a HelixNet Main Station providing a dual LAN interface to connect to other Main Stations. RJ-45 connectors allow up to three HMS-4X Main Stations to be linked to ...

Clear-Com's RM-704 is a 4-Channel 2RU Remote Station with built-in Speaker that is intended to work with other Clear-Com party-line products. Getting its power from the intercom line, the RM-704 can monitor intercom activity on one or all ...

The Clear-Com PS-702 is a single-rack-space, two-channel intercom power supply that supplies 2 amps at 30 volts DC to operate Clear-Com beltpacks and remote stations. This power is supplied to either or both channels, and will support up t ...

The Clear-Com HKB-2X is a 4-channel, two display with shift page, flush mount digital partyline headset and Speaker Station that connects with the HMS-4X Main Station and other user stations using various cable types, including a single sh ...

The IF4W4 from Clear-Com is a 4-channel four-wire modular interface that connects camera intercoms, two-way radios, fiber optics, and other 4-wire devices to a standard Clear-Com intercom line. The 1-RU chassis holds up to four individual ...

FreeSpeak Edge IP connected Transceiver (E-IPT) for the FreeSpeak Edge digital wireless system. Connects up to 10 FS Edge beltpacks. The transceiver can be powered from an AES67 compliant network switch PoE or from a local PSU adapter, sup ...

This 4-port quick charger can charge up to 4 BAT41 Li-Ion batteries with storage accommodation for 6 charged batteries.

The TW-47 two-way radio interface is a stand-alone system that enables Clear-Com Encore systems to connect with external audio sources. Designed to connect a 2-way radio or walkie-talkie into a single channel of a standard Clear-Com, RTS*, ...

The Ride Control 12 Button KB Station from Clear-Com is a 12 pushbutton KB station for Theme Park Ride Control use (NOTE: Requires HCS 2.1.0 HMS-4X software). This model (also known as HRI-12B) comes with 12 alerting buttons, buzzer, menu ...

The MA-704 from Clear-Com is one of their IFB Master Control Access Stations. This version can be console-mount or rack-mounted and controls the program interrupt (IFB) to four talent channels. The MA-704 also includes a gooseneck mic conn ...

2-channel 2.4GHz BP200 wireless belt pack with HS15 single muff noise cancelling headset and 2 BAT41 rechargeable batteries included. BP200 Specifications Battery Requirements: One Lithium-Ion Rechargeable Battery Life: Latched (Hands-Free ...

The FSII-BASE-II-5 is a base station from Clear-Com that's designed for use with the wireless FreeSpeak II 1.9 GHz active transceiver antennas and supports five belt packs. It comes equipped with four 2-wire connections for analog partylin ...

Clear-Com's PIC-4744 is an analog partyline controller that provides four XLR3M analog partyline level audio outputs (Talent channels) and four XLR3F analog line level audio inputs (Program channels). Each Talent channel can select and pla ...